• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

LOWERING my Bronco

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
So where is Dale at with his ?

Things are slow going, I have the front on mine tacked in place, still working on the rear c notch.

Lots to do though, lots of parts issues to resolve as well.
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
Well here are pictures of the font tacked into place, and the placement of the front wheel in the fender.

Any thoughts on how the wheel looks in the fender. There are some inner fender mods in the future as well I see.
 

Attachments

  • front tacked.jpg
    front tacked.jpg
    56.6 KB · Views: 186
  • wheel1.jpg
    wheel1.jpg
    52.6 KB · Views: 183
  • wheel2.jpg
    wheel2.jpg
    51.9 KB · Views: 169
  • frontinnerclear1.jpg
    frontinnerclear1.jpg
    42.8 KB · Views: 154

slcpunk

Sr. Member
Joined
Feb 4, 2006
Messages
419
Loc.
The WB, UTAH
looks sweet indeed. Someday I really would like to build a half cab lowered witha turbo v6 or something good on gas and very unconventional. This of course is after my current eb build,my cherokee prerunner, 77 xs750, and this enclosed trailer my dad wants to build... Did I mention I might be getting a job on a cruise ship for 8 months... Yeah I might never finish anything but you guys help me dream :)
 

sstlaure

Bronco Slacker
Joined
Jun 7, 2004
Messages
1,881
Nice....You should look into a set of the 18" torq thrust style wheels off of the new Mustangs.
 

Flash69

Bronco Guru
Joined
Jul 21, 2004
Messages
2,429
Loc.
Southwest Va
I drove to southern Illinois for the red halfcab in my gallery. I was going to drop this truck. After I brought it home and started driving it around town, everyone convinced me it was way too nice to cut up. My only regret is I still wish it was UNCUT, but oh well. I found a '66 locally (see below) that was a second owner truck. The guy bought it from his uncle, who was the original owner. It is a little rough, but perfect for what I have in mind. Now I just have to get started.....soon.

I Love the red one in your Gallery. It would have been nice uncut but it is sweet just the way it is. Very Nice I would be proud to own it.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Here are a few pics of Dale's rod. He is exited to have paint on it finally! What do you guys think?
 

Attachments

  • 73 Bronco 003.jpg
    73 Bronco 003.jpg
    37 KB · Views: 281
  • 73 Bronco 007.jpg
    73 Bronco 007.jpg
    39.3 KB · Views: 212
  • 73 Bronco 006.jpg
    73 Bronco 006.jpg
    40.1 KB · Views: 344
  • 73 Bronco 005.jpg
    73 Bronco 005.jpg
    43.2 KB · Views: 212
  • 73 Bronco 004.jpg
    73 Bronco 004.jpg
    40 KB · Views: 252

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
Looks really good. I am more than a little jealous. Do you have any pics straight on from the side as well as the engine compartment. I am curious about any inner front fender mods.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Well, I now have a rolling frame. Not bad for the first time I pulled a tub off. My son and his friend, and my brother helped get the items disconnected and welded supports in the door openings yesterday. I was flying solo today pulling the motor and finishing off the rest. Althought the wife helped with pulling the hoist out from under the frame with my other pickup (that was an experience!). It won't be long and it will have the new Mustang II suspension welded in and installed. The halfcab is scheduled for the chop around the first week of December. Lots of mods to do! I will be sure to keep you updated.
 

Attachments

  • 5103.jpg
    5103.jpg
    75.3 KB · Views: 113
  • 5104.jpg
    5104.jpg
    82.7 KB · Views: 102
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
I am at work right now, and all I can think about is getting home so I can tear the frame down for sand blasting! Then it on to the body shop onto the frame machine to make sure it is straight. Then on to the installation of the Mustang II front end components. And then...sorry my mind is not on my work today! ;D
 

theshadow

Sr. Member
Joined
Jun 30, 2006
Messages
369
Well, I now have a rolling frame. Not bad for the first time I pulled a tub off. My son and his friend, and my brother helped get the items disconnected and welded supports in the door openings yesterday. I was flying solo today pulling the motor and finishing off the rest. Althought the wife helped with pulling the hoist out from under the frame with my other pickup (that was an experience!). It won't be long and it will have the new Mustang II suspension welded in and installed. The halfcab is scheduled for the chop around the first week of December. Lots of mods to do! I will be sure to keep you updated.

Chopping the top? that is going to look SICK! cant wait to see
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
Here are some shots of the c notch installed and the front welded in. now I am looking at new frame horns/engine stands. The grinder and I had a slight disagreement as to how much to cut off. the grinder won obviously.

The dash pics I removed the speaker grill, ash tray, and the stock radio holes.
I plan to mount the computer behind the dash in the ash tray-speaker grill location.
 

Attachments

  • Dsc02304.jpg
    Dsc02304.jpg
    48.2 KB · Views: 161
  • Dsc02307.jpg
    Dsc02307.jpg
    53.4 KB · Views: 136
  • Dsc02311.jpg
    Dsc02311.jpg
    62.2 KB · Views: 174
  • Dsc02315.jpg
    Dsc02315.jpg
    60 KB · Views: 143
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Is that a beer can ring in the center of that crossmember behemoth? Purely medicinal I am sure!
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
hey behemoth...did you ever get ahold of Dale? I sent him and email back when you contacted me, and I have not heard anything back from him yet. Do you have any diagrams/measurements for me on the Heidt's crossmember? We will be starting on mine around Thanksgiving.
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
I sent him a mail and have not heard anything back from him yet. In one of the earlier posts there are a mess of measurements. There is not a whole lot of wiggle room in there for the measurements.

Yepper that was a liquid courage mark on the crossmember, the welder seems to run on fosters oil cans.

There is a c notch kit in the mail.

I will probably need to replace the frame horns.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
I received the frame notch kit (THANK YOU BEHEMOTH!). Looks like it will be a much better fit than the other "big kit" we both bought. Thanks for the pics of your notch install. I really like the mods you did to make it fit. That looks about as perfect as it gets under there.
The frame is at the sand blaster, and should be done by Friday. I am more than ready to get this thing going. I still have to contact Van for a set of his special made 4.6 DOHC headers and motor mounts, and order the coil springs. Even though the engine weighs in at 576 lbs., the Heidt's tech guy said to go with the 325 pound springs. he said it will ride hard at first, but then break in for a softer ride after 500 miles.
I hope to have everything (notch kit, Mustang II kit, new bushings, etc.) over in my buddies shop before Thanksgiving break next week. Trust me...there will be plenty of pictures! Now let the fun begin!
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
I would also like to thank NicksTrix for the rear axle retaining plates. By the time this project is finished I will have a long list of "thank you's" to alot of people here. I could not have gone without their parts, inspiration, and tech support. We truly are a brotherhood!
 
Top