behemoth
Bronco Guru
- Joined
- Jul 2, 2003
- Messages
- 1,736
I set it down on the ground to get another look at it and see what the next issue will be.
Looks like the inner fenders will have to go as in these pictures the front tires are sitting on the inner fenders, or the front would be lower.
I also may have to get stiffer springs for the front coil overs but we will see once I get them adjusted. You can see in the photos that the arms in front are not parallel to the ground and the coils are not adjusted or compressed much.
The tank is in and even though it is just a little bigger than the stock tank speed bumps will be an issue. You can see it below the rear diff in one of these pics.
Looks like the inner fenders will have to go as in these pictures the front tires are sitting on the inner fenders, or the front would be lower.
I also may have to get stiffer springs for the front coil overs but we will see once I get them adjusted. You can see in the photos that the arms in front are not parallel to the ground and the coils are not adjusted or compressed much.
The tank is in and even though it is just a little bigger than the stock tank speed bumps will be an issue. You can see it below the rear diff in one of these pics.











