• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Lowering my early Bronco "69" HELP!

wildbill

Old Bronco Guy
Joined
Jun 29, 2001
Messages
6,890
:-[ :-[ :-[ If you are realey set on buggeren a bronco just take the torch out and heet the coil in one spot then the other untill you have it were you want it but what a wast :-[ :-[ :-[ Bill :-U :-U :-U
 

67halfcab

Bronco Guru
Joined
Mar 30, 2002
Messages
1,642
Loc.
Michigan
Since you are lowering it I assume you are not really in need of the 4x4 so I'd swap in the Mustang front and then your lowering options are much greater since you get away from the solid axle limitations for lowering.<br><br>Good luck on your project and post pics when done.<br><br>Don't sell it, lower it and like the rest of us, ENJOY IT the way you built it.
 

hucklburry

Jr. Member
Joined
Aug 26, 2002
Messages
64
I think it could look good with an uncut Bronco. My uncut is getting a 3.5" lift at a minimum, but thats me. Going to fit some skinny 33s or bigger under there!!<br><br>The lest harmful way would be to cut stock springs (who cares about those??) and do some sort of AXLE OVER SPRING conversion. That would be easily reversible and keep some resale value to it. You could weld some spring pads underneath, use stock springs.<br><br>You might need a shorty adjustable track bar to correct steering geomerty???<br><br>Personally, thats the route I would look at. It would be relatively easy I think, and reversible, which might or might not mean anything to you.<br><br>Good luck!! If there is one constant in the EB world, its customizing your EB.<br><br>--Jim
 

Jeepster

Bronco Guru
Joined
Jul 13, 2001
Messages
1,507
It would be nice to get some feedback from this guy........I got a feeling that your all barking up the wrong tree by suggesting that the dude is slamming the rig. (at least I hope so ::))
 
Top