74NJBronco
Full Member
I lowered my front end from a 5" lift to a 3.5" lift. I read everyone's advise on how to this and what parts to buy. Worked out great expect for the old top spring retainer brackets were bent into a C shape (purchased new ones)LOL.
My question is, about the lowering the track bar or raising it. PO installed a drop down bracket on the driver's side frame rail which was done correctly. The track bar was installed in the lower position of the bracket, 5" lift position. There is an upper hole above the lower one. It measures 1.5" above the lower one on a 45 degree angle. I am thinking this would be the correct position for the 3.5" lift. The only thing that worries me is that the upper position is on a 45 degree angle and not directly above. What do you guys think? Would the upper hole be correct on the 45 degree angle work. Thanks
My question is, about the lowering the track bar or raising it. PO installed a drop down bracket on the driver's side frame rail which was done correctly. The track bar was installed in the lower position of the bracket, 5" lift position. There is an upper hole above the lower one. It measures 1.5" above the lower one on a 45 degree angle. I am thinking this would be the correct position for the 3.5" lift. The only thing that worries me is that the upper position is on a 45 degree angle and not directly above. What do you guys think? Would the upper hole be correct on the 45 degree angle work. Thanks











