• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

mig or tig weld

dube

Bronco Guru
Joined
Feb 19, 2012
Messages
1,042
Loc.
big lake Mn
i have both welders mig and tig. what do you guys use for doing the sheet metal on these rigs? i prefer tig welding, i can keep it nice and cold on sheet metal. mig is faster. but i have plenty of time do this. i am sure most of you guys use mig cause its cheaper to own a mig welder. just wondering.
 

73bronco

Sr. Member
Joined
May 10, 2007
Messages
936
Tig all the way, especially on sheet metal. Really tig on everything if its a big enough machine!
 

allenfahey

Bronco Guru
Joined
Mar 18, 2004
Messages
2,672
mig or spot welders is what 99.9% of bodyshops use. Proper use of a mig welder won't warp a body panel since you should only be spot welding with it anyways.
ICAR approved repairs are spot welders like the ProSpot4 that we have at work or a mig welder. Most shops use mig.
 

360 4V

Sr. Member
Joined
Feb 3, 2011
Messages
519
Mig is fine for the job but tig allows more control over heat input. This is very important when welding thiner metals. Tig is the only welding process that can weld aluminum foil. It is used by jewelers and gun smiths.
 
OP
OP
dube

dube

Bronco Guru
Joined
Feb 19, 2012
Messages
1,042
Loc.
big lake Mn
Mig is fine for the job but tig allows more control over heat input. This is very important when welding thiner metals. Tig is the only welding process that can weld aluminum foil. It is used by jewelers and gun smiths.

Well then. I will tig every thing. It was my first choice in the first place. Just wanted to no what most guys use. Thanks again for your input. Tig welder by trade. Time for a beer.
 

brownb4

Jr. Member
Joined
Aug 24, 2011
Messages
98
Loc.
Friendsville, TN
love TIG.... with a needle sharp tungsten you can make some pretty beads on thin metal. if you have the machine i would TIG all the way. less work in the long run on exposed seams, less grinding.
 
Top