mavereq
Bronco Guru
- Joined
- Feb 19, 2009
- Messages
- 2,092
yes, i used the search feature. i still have more questions.
i picked up a set of axles from a 79 f150 today. unfortunately they have the cast wedges, unlike what the ad on craigslist said. at least it gave me a bargaining chip to talk the price down with.
1. i'm not planning on narrowing these. i'm going to run a 17" wheel with more backspacing.
2. i plan to put longer radius arms on. from what i remember of geometry class, if the wedges are spaced further apart then that will move my radius arm brackets forward on the frame a bit. does anyone know about how much? also, any recommendations on extended arms that would work better with the wider spacing? i am thinking of just modifying my stock arms but haven't decided yet.
3. what should i do with my coil spring cups? the holes that are drilled in them now are off center. can i just flip the cups 180* or is that not enough? i read that some people redrilled holes.
4. has anyone used the f150 tracbar mount and just used an adjustable tracbar? it looks like i can't really raise it any without moving the mount inboard because of the design of the spring cups. i guess i'll have to get the housing mated up to the frame to see what angle my steering is at and then just go from there.
5. this axle already has disc brakes on it. it looks like the hub and rotor are one piece. i saw on wildhorses that they sell separate hubs and rotors. is that a good investment?
6. it looks like i can just reuse the steering center link and possibly just flip it over for the tro conversion. am i missing something on this? it looks way too simple and i know murphy won't allow that.
any and all pics would be appreciated. well, as long as they aren't of your scrotum. thanks for the help.
i picked up a set of axles from a 79 f150 today. unfortunately they have the cast wedges, unlike what the ad on craigslist said. at least it gave me a bargaining chip to talk the price down with.
1. i'm not planning on narrowing these. i'm going to run a 17" wheel with more backspacing.
2. i plan to put longer radius arms on. from what i remember of geometry class, if the wedges are spaced further apart then that will move my radius arm brackets forward on the frame a bit. does anyone know about how much? also, any recommendations on extended arms that would work better with the wider spacing? i am thinking of just modifying my stock arms but haven't decided yet.
3. what should i do with my coil spring cups? the holes that are drilled in them now are off center. can i just flip the cups 180* or is that not enough? i read that some people redrilled holes.
4. has anyone used the f150 tracbar mount and just used an adjustable tracbar? it looks like i can't really raise it any without moving the mount inboard because of the design of the spring cups. i guess i'll have to get the housing mated up to the frame to see what angle my steering is at and then just go from there.
5. this axle already has disc brakes on it. it looks like the hub and rotor are one piece. i saw on wildhorses that they sell separate hubs and rotors. is that a good investment?
6. it looks like i can just reuse the steering center link and possibly just flip it over for the tro conversion. am i missing something on this? it looks way too simple and i know murphy won't allow that.
any and all pics would be appreciated. well, as long as they aren't of your scrotum. thanks for the help.











