kyle
Bronco Guru
- Joined
- Nov 2, 2001
- Messages
- 2,199
So I have read some of the post on this topic and I am still left with the same question.
I know that I am going to run a HP 44 in the front of my 69. I currently have it tore down to the housing, and I have a shop that will narrow it for a decent price when they install the gears. It has welded wedges so should I choose to run full width I could easily move the wedges in, but what is the advantage of doing that as opposed to narrowing the housing? I could get a wider stance by running less back spacing on the wheels so is there a real advantage to full width?
This Bronco is going to be street driven to were it is going to be wheeled so there is also some concern about being somewhat close to legal.
I know that I am going to run a HP 44 in the front of my 69. I currently have it tore down to the housing, and I have a shop that will narrow it for a decent price when they install the gears. It has welded wedges so should I choose to run full width I could easily move the wedges in, but what is the advantage of doing that as opposed to narrowing the housing? I could get a wider stance by running less back spacing on the wheels so is there a real advantage to full width?
This Bronco is going to be street driven to were it is going to be wheeled so there is also some concern about being somewhat close to legal.











