my 2nd EB stock original cut rear with questions

[broncojames]

The one at the seat is the manual tank switch. the dash mounted switch is the fuel gauge switch, to toggle between the two tanks.

yep i discovered that after running new lines from tank to the manual switch.. PO bypassed the switch and was running only on the front tank. witch makes me think and wonder why i did not take the time to put gas in it so ill find out tomorrow if its a leaky tank or what and might have to redo the sending unit or track the wires to see it broke or shorting out...

 

[broncojames]

The PO of the 69 gave me a edelbrock 1406 600cfm 4bbl carb what 4bbl intake do i need to keep from cutting stock hood ??

 

[Tito]

Need a non-air gap style, get an edelbrock performer or similar. Offy is good too. Will need a recessed base, possibly an offset base as well depending on your distributor.

 

[broncojames]

thanks man for the quick reply as im surfing edelbrocks web page now

 

[Tito]

The performer manifold has the best RPM range for the Bronco, the RPM performer is more for HP vs torque.

 

[broncojames]

part #'s ??? some dont even say air gap or non air gap

 

[Tito]

http://www.summitracing.com/parts/EDL-2121/
thats what you want.

 

[Sylar]

nice half cab... those things are kewl !

 

[mavereq]

that looks like a great start

 

[stupidboy]

pictures

Ha ha ha I laugh every time I see that.;D;D;D;D

 

[broncojames]

http://www.summitracing.com/parts/EDL-2121/
thats what you want.

thanks for the link Tito just in the budget as well

 

[Tito]

Check ebay and on here for a used one. I think I saw one for $100 the other day in the classifieds here.

 

[broncojames]

Check ebay and on here for a used one. I think I saw one for $100 the other day in the classifieds here.

well after looking around i desided to check out what is (was) on my 66 and its a EDELBROCK PERFORMER 289 under side is staped 2121 is that the same thing ?

 

[broncojames]

so all EB's vins start with the U13-14-15 ???

my vin on my glove box door is 01gle53072 but the title is U14gle53072 why would there be a difference ????

 

[broncojames]

would it be safe for me to take a old school 3" lift and 33x12.50 from my 66 and put on my 69 half cab ?? any advice or input would be helpful