• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Narrowing a D44

Pedestrian

Bronco Missionary
Joined
Sep 10, 2008
Messages
2,299
I'm in the process of narrowing a HP D44 and I need to know just how deep is the weld at the C wedge? I have ground down about 3/8 inch and can't find the line of seperation yet. HELP :)
 

siderbox

Bronco Guru
Joined
Nov 5, 2007
Messages
1,119
You'll need to go a bit pasted making a 90 degree corner out of the axle tube and C.
Once you get it that far hit the C with a BFH, that should show the seam.

There's a few guys that have some good pics and write up of the procedure on here.
I'll see if I can find them.
 
Top