• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Need Front Brake advice

gityup68

Full Member
Joined
Feb 4, 2004
Messages
188
Loc.
Western Mass
Hey,
I have a pretty good running truck, all but the front brakes. I am not very comfortable at all with what I got. I converted to Ft Power Disc about 8 years ago and it just seems to never have worked correctly. All new lines, all new calipers, good vacuum. But pulls to the left and i am always Leary of hitting them hard if I had too as I feel that I'd end up in the other lane. My conversion was a GM. I just don't think it is good. What do you think is a better option as a whole conversion kit. As I don't know what else to do to mine. Some have told me it's the steering box, not feeling to confident in that. However, plan on having it rebuilt during the winter. Does anyone have an opinion on the Wildwood Disc Kits, are they much better then what most of the Aftermarket shops sell? Tks
 

Timmy390

Contributor
Bronco Guru
Joined
Jan 1, 2011
Messages
5,948
Loc.
Conway, AR
On the chevy conversion you have to grind the knuckles so the calipers will work properly. Sounds like you have a caliper hitting the knuckle and not engaging and the other side is working fine.

Might not be the issue but I would start there

Tim
 

Apogee

Contributor
Bronco Guru
Joined
Nov 26, 2005
Messages
6,348
Loc.
Tangent, OR
There is nothing fundamentally wrong with the design of the GM disc brakes, so if you're having an issue, it's probably something simple as noted above. A $1500 Wilwood brake kit seems a bit overkill for a problem that can be solved in less than 15 minutes with a few hand tools and an angle grinder IMO.

Otherwise you could have a faulty caliper on the passenger side (seized piston?), or you could have a bad hose or kinked hard line to that side. Any issues with the steering that severe would most likely be noticeable at all times, not just under braking, so I would tend to think that's not it.

That said, the fact that you've driven it for 8 years on public roads with questionable brakes is the bigger concern, so I would make sure your steering and brakes are both fully functional for everybody else's safety if not for your own.
 

savage

Bronco Nut
Joined
Apr 18, 2007
Messages
2,483
Loc.
Renton
This is a good video that talks about the conversion, and how to grind the knuckle.[youtube]3G0NhPMwhRw[/youtube]
 

B RON CO

Contributor
Bronco Guru
Joined
Jun 29, 2016
Messages
2,484
Loc.
Statesville, NC
Hi, as mentioned the calipers need to to be free to slide, but fit the caliper bracket. On any brake job the caliper slide area needs to be cleaned with a wire brush and lightly greased. If my Bronco pulled to the left like you say I would suspect the right side is not working correctly. I would shoot the rotors with a digital temperature gun and see if the left side is a lot hotter than the right. I would bleed the right side to see if you are getting brake fluid. If you don't get a good strong stream of fluid check the hoses and lines. If the fluid checks out change the caliper or correct the mounting. Also check the pads for wear. If the pads on one side are a lot more worn there is a problem. Good luck
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
And if it's a gentle pulling to one side, it could be the rear brakes not adjusted properly.
If it's more of a pronounced pulling that almost wants to jerk the steering wheel, it's usually either a front brake or it could even be a bad wheel bearing or improperly adjusted wheel bearing.

Good luck.

Paul
 
OP
OP
gityup68

gityup68

Full Member
Joined
Feb 4, 2004
Messages
188
Loc.
Western Mass
knuckles it was

Thanks for the great input guys, it was exactly what you said the knuckles had not been grinded down. That has been corrected Thanks to my friend and Bronco Guru Jim Basel from CT. I appreciated the post.
 

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
.. DARN I was trying to get in & say send me your old chevy stuff. I'll take a shot at it..
. Yes there is no rule as to how much needs to be ground off. & None of us like taking too much off the Knuckles . So I think I had to grind one of mine twice.
..........
... Keep asking us questions.. There are no Dumb QUESTIONS other than those not ask.
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
X2 what Paul said . Check the rear brakes first because a rear brake can pull you suddenly to the left or right if the other side isn't working properly. I worked at a GM dealership doing brakes in a different century...

From what you told us, Save your $, check the rear then go back to the front! Good luck
 
Top