• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

P0300 cold start stumble

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
Voltage looks good. You disproved the voltage theory when you started it with the charger attached. You need to start looking at other things.
 
OP
OP
wesleydax

wesleydax

Full Member
Joined
Apr 12, 2011
Messages
331
I dont think i mentioned this, but the reason i thought voltage was the other day when starting or just after the gps gave a low battery notice.
 

EFI Guy

TheEFIguy@gmail
Joined
Apr 14, 2013
Messages
1,168
Loc.
BFE
I don't think your problem is related to the charging system but it doesn't hurt to check it out. It would be a good idea to test for ripple (AC voltage output caused by a bad diode) because AC voltage will cause some weird things to happen.

My guess is you have either fuel or coolant seeping in to a cylinder while it sits for a while. After a few seconds of running it clears out.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
At this point I would have a fuel pressure gauge installed.

Have you tried cycling the key a few times before starting (or otherwise manually running the fuel pump) to get a good solid prime before trying to start?

After that I would start looking for a scan tool (not just a code reader) that you can look at values. Maybe something as simple as a coolant temp reading too hot while cold fooling it into a lean hot start? But you need to look at data from a scan tool to see what is going on.
 
OP
OP
wesleydax

wesleydax

Full Member
Joined
Apr 12, 2011
Messages
331
after several trips today the issue has not repeated it self. yes i did try cycling the key to make sure pressure was good. when i did that it still stumbled. If it happens again ill hook laptop up and see if efi guy can look at it.
 
Top