• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

pitman arm removal

madbronco76

New Member
Joined
Nov 29, 2010
Messages
2
Loc.
prattville
i have a 1976 bronco that i am trying to rebuild the power steering box. i am having problems removing the pitman arm. using a gear puller and have soaked it with penetrating oil, but it wont budge. any suggestions? thanks in advance
 

DanWheeler

Bronco Guru
Joined
Nov 8, 2005
Messages
2,572
Loc.
Kirkland, WA
I think someone told me once your not supposed to hit those things hard with a hammer... bad for the seals or something. Maybe it doesn't matter since you're rebuilding though.
 

ken75ranger

Bronco Guru
Joined
Jan 27, 2002
Messages
5,069
Loc.
Troy, NY
Heat up/the pitman arm with a propane torch and give it a few more whacks with a BFH. Don't get hit when it flies off.
I forgot- do the heat with the puller on.
 
Last edited:

Pokey71

Bronco Guru
Joined
Feb 24, 2007
Messages
1,010
I soaked it in wd40, put the puller on tight, more wd40, tightened it up again, went to bed and woke up to the pitman arm on the ground.
 

71broncman

Sr. Member
Joined
Sep 6, 2009
Messages
410
Loc.
Maysville, Ky
My vote is for a pitman arm puller too. You might be able to borrow/rent one from one of the parts stores if you dont want to buy one. I also have the Harbor Freight puller as well as a BFH if needed. Mark
 

Mark

Contributor
Bronco Klutz
Joined
Aug 29, 2003
Messages
5,417
Loc.
NW Indiana
2 BFH simultaneously.
Hit that fugger HARD.
Don't be a sissy.
Won't hurt any seals.
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
After you get tired of soaking/heating/beating/breaking pullers take it to a shop and use a press.
 

taipeichris

Bronco Guru
Joined
May 11, 2006
Messages
1,753
Steve,
It looks like you've got the Darth Vader of pullers there, where the heck did you find that? It took me two of the Harbour Freight pullers, the 1st one broke. Liquid wrench did the trick on mine.
Good luck!
Chris-
 
OP
OP
M

madbronco76

New Member
Joined
Nov 29, 2010
Messages
2
Loc.
prattville
thks for the help guys! got tornado damage day after my post so havent tried anything yet will yall know how it all works. especially like the BF hammer part!!!
 
Top