• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Poly Bushings vs original

tbrend

Sr. Member
Joined
Oct 27, 2004
Messages
682
Loc.
God's Country (Iowa)
Hello,

I am having my original 302 rebuilt as we speak. I am also having new polyurethane bushing installed; C bushing, radius, track arm.

What kind of difference should I expect?

Right now, with the old bushings, it wanders all over the place.
I replaced the tie rods & drag link about 6 years ago and they are still in great shape.

Also, I replaced the original seats with high back seats from a Baracuda. I want to put in shoulder belts. I am figuring a junk yard would be the best place to find some. Maybe off a J**p. I would like them to mount to the roll bar. Has anyone done something like this? Do you reccomend mounting to the roll bar? What did the belts come out of?

Thanks for the help
 

72_EB

Contributor
66to77
Joined
Feb 4, 2003
Messages
4,982
Urethane is better overall (especially on road). It will not deterioate like rubber, will be firmer, and will last longer. Some like the rubber bushing still for offroad for better flex, but a lot of the urethanes nowadays are still very flexable. I've heard Energy Suspension is a much harder compound than Prothane, but have only experience with Prothane, which I like. I'm not sure who makes the ones at the vendors. Kurt Millard makes the angled radius arm bushings that Chuck sells too which get your angles closer to where they should be with a lift. That's what I'm replacing mine with soon.

If you are getting a lot of play and have changed your tie rods and drag link, how is your gear box? Are the bolts tight to the frame? It your frame cracked?
 
OP
OP
tbrend

tbrend

Sr. Member
Joined
Oct 27, 2004
Messages
682
Loc.
God's Country (Iowa)
72_EB said:
If you are getting a lot of play and have changed your tie rods and drag link, how is your gear box? Are the bolts tight to the frame? It your frame cracked?

I checked the gear box, everything is tight. Frame looks good, too.
Hopefully when the new ploy bushings are in, they will tighten everything up.
I took a look at the original C bushings...the left side is missing missing about 1/2 its bushing and the right side is looking like it is going that wy too. The rubber is really brittle and cracked. I quess, what do I expect after 30 years?
I am really anxious to pick it up next week. I hope it solves the problem.

eds66bronco said:
shoulder belts
http://classicbroncos.com/seatbelt.shtml

i got some leather seats and shoulder belts from a mid 80's saab. the belts have covers like in the above link and some of the holes even lined up with a few holes in the floor.

Thanks for the link. It helped out a lot.
I am going to head to the junk yard tomorrow.

Thanks
 

70TEXEB

Full Member
Joined
Jun 14, 2004
Messages
283
Loc.
Abilene, TX
I agree with 72_EB. one thing I can add though is somewhere I read that you should keep your radius arm bushing rubber instead of polyurthane. The rubber is softer and when you hit rocks or pot holes, it gives cushion effect.
No suspension expert, just what I did on mine. Maybe some others can help on this part. :)
 

COBlu77

Sr. Member
Joined
Feb 10, 2004
Messages
867
Loc.
Arvada, CO
Polyurethane bushings should help your wander alot, especially replacing the track arm bushings. Be careful and don't tighten the radius arm bushings too tight. Difference should be night and day.
 
U

Unregistereds

Guest
poly bushings drive way better------ as said in the last post make sure to not over tighten the radius arm bushings ,this is VERY,VERY,VERY critical -- manual recommends 80 foot pounds for the radius arm bushing but with poly I tighten them to 25 foot pounds, if your not doing the work make sure you tell your mechanic, also energy suspension & some others have solid tubes on the track bar & leaf springs where duffs has a flat piece of steel rolled into a cylinder like the stock ones, the solid tube in the bushings is less suseptable to over tightening and binding up
 
Top