• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Prepping floor pan support channels??

kuch68

Jr. Member
Joined
Aug 8, 2001
Messages
135
Loc.
Waterford, MI
Just about ready to weld in the new floor pans, and I am wondering what I should do to the inside of the support channels since I won't be able to get to them after welding the floor back in. I have weldable primer, is that good enough? Or should I spray it with something more durable that will stand up to the welding on the flanges of the support channels? Is there such a thing?

thanks
 

hd03sporty

Sr. Member
Joined
Nov 4, 2003
Messages
388
Loc.
Tucson AZ
when i did mine i found 30+ years of dirt and some rust flake I live in AZ so the rust was'nt that bad hooked up a stiff wire wheel to the grinder got all the loose stuff off and then coated with POR-15 before i welded the pans back in, then did some spot coating with the POR-15 on the welds underneath and had the tub sprayed in rhino lining......
 

Blue71

Contributor
Bronco Guru
Joined
Aug 27, 2001
Messages
5,151
I did pretty much the same. After cleaning them and smoothing them up with a grinder. I sprayed a them with 3M weld through primer. I put POR 15 on the bottom channel and walls of the support braces. After preparing my pans to go in, the last thing I did was POR 15 the bottom of my floor pans all over , except where I was going to weld. This saved me a lot of time underneath trying to POR 15 the bottoms. I put a seam sealer on the seams on the top and underneath. Then POR 15'd them after it dried a day or so later. Looks clean.

Good Luck,

Blue71
 
Top