• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Project grocery getter

OP
OP
P

ponyracer

Sr. Member
Joined
Sep 30, 2009
Messages
706
Loc.
Crestview, Fl, 32539
Here's a few pics:

Finished my pass side front wheel well area
DSC05060.jpg

Front brake lines, ran them through the engine mount.
DSC05058.jpg

Got the hydroboost on
DSC05054.jpg
 

fordguy

Contributor
Bronco Guru
Joined
Jan 23, 2005
Messages
6,362
which calipers and rotors did you use? do you have an e-brake?
 
OP
OP
P

ponyracer

Sr. Member
Joined
Sep 30, 2009
Messages
706
Loc.
Crestview, Fl, 32539
Here's some shots of what I've been doing today.

Still having problems with the HB, CAN'T seem to get the air out of the system, steers hard and growls when you hit the brakes.

DSC05067.jpg

DSC05068.jpg

DSC05069.jpg

DSC05070.jpg

DSC05071.jpg

DSC05072.jpg

DSC05073.jpg

DSC05074.jpg
 
OP
OP
P

ponyracer

Sr. Member
Joined
Sep 30, 2009
Messages
706
Loc.
Crestview, Fl, 32539
Ram mat audio, should quiet the ride down a good bit. I welded washers to the floor for support where the seat bolts go through it.

Anyone think I should weld the top on solid? I'll prob never remove it anyway. I'm sick of the water leaks and looking at it.
 

camomog

Full Member
Joined
Sep 10, 2008
Messages
254
Loc.
Reno, Nv.
You could get the tape from a RV place that goes under campers, its about 1/8" thick and would seal it and still give the option to remove it and it's cheap.
 

cobralee

Sr. Member
Joined
Jul 6, 2006
Messages
550
Loc.
Northwestern OK
Still loving the buildup man, thanks for the posts.

IMO I wouldn't weld the top shut even if you plan to never take it off and even if you plan to "never" sell it. I think it would be a MUCH better selling point for the Bronco in the future if the top is still removable just in case something comes up and you do have to sell it. Welding is much more "permanent".
 

Steve83

Bronco Guru
Joined
Jul 16, 2003
Messages
9,360
Loc.
Memphis, TN, USA, Earth, Milky Way
Welding doesn't insure no leaks - it just insures that, if there IS a leak, it'll be a nightmare to fix. But if you prep it REALLY thoroughly & apply plenty of seam-sealer in strategic locations, you should be OK welding it down. I'd test-fit it at least a dozen times to check the seams & door seals before the first tack weld.
 
OP
OP
P

ponyracer

Sr. Member
Joined
Sep 30, 2009
Messages
706
Loc.
Crestview, Fl, 32539
I'm on the fence about it, I may try the weather strip route first and see what happens.


Well I got the HB working, drum/drum/manual to disc/drum manual to disc/disc hydroboost, OMFG what a diff. Still trying to scrape off the skin I left smeared on the windshield the first time I hit the whoooaaaaaa pedal.
 
OP
OP
P

ponyracer

Sr. Member
Joined
Sep 30, 2009
Messages
706
Loc.
Crestview, Fl, 32539
Got some pics:
She's a little high in the front, I'm going to add a winch and heavy bumper so It'll prob equal out, if not I'll block the rear to match.
DSC05079.jpg

Fuel tanks done, not real happy with it but it'll work for now.
DSC05082.jpg

Rear shocks mounted.
DSC05083.jpg

Full width views, 35x12.50's on 3.5 bs 8" wheels
DSC05081.jpg

DSC05077.jpg

DSC05075.jpg

Clearance shot, ya I know it needs paint!!
DSC05080.jpg

Need to raise my trac bar to the upper mount
DSC05078.jpg


DSC05076.jpg
 
OP
OP
P

ponyracer

Sr. Member
Joined
Sep 30, 2009
Messages
706
Loc.
Crestview, Fl, 32539
Thinking of looking for an extra cab truck to get the back of the cab from. Cut the A pillars and below the side glass and rear glass. Box it in and weld it on or make it removeable. Prob be easier than trying to mod my current rusty modded junk top. Anyone have any ideas? Ranger extra cab? F150 would be to wide=custom rear glass or cut down rear glass=$$$.

Looks like I'm going to the j/y with a saws all and a tape measure....
 

73stallion

Bronco Guru
Joined
Mar 5, 2004
Messages
16,786
Loc.
Eugene, OR
i like it. but i keep wanting to ask you, are you only gonna run 3 leafs in the rear? concerned any about axle wrap?
 
OP
OP
P

ponyracer

Sr. Member
Joined
Sep 30, 2009
Messages
706
Loc.
Crestview, Fl, 32539
Not sure yet, there 3" wide and came from a 2000 e250 van. 8 lug wheels, d60 rear, the funny thing is that I only took out the flat bottom overload. Not sure what the load cap of the van was but it was the extended panel van so It must have been alot. I'm going to drive it on the street and get it in the dirt and do some testing.
 

englewoodcowboy

Lick Creek Restorations
Joined
Jul 25, 2010
Messages
4,201
I think you will be fine... more than likey to pull one more leaf if she is too stiff. Them vans were heavy and designed to carry alot.
 

73stallion

Bronco Guru
Joined
Mar 5, 2004
Messages
16,786
Loc.
Eugene, OR
the more i see these, the more i think ford should have built a longer bronco body! kinda want to extend mine now.
 
OP
OP
P

ponyracer

Sr. Member
Joined
Sep 30, 2009
Messages
706
Loc.
Crestview, Fl, 32539
I'm going to start a petition for the aftermarket glass tub makers to build a stretched version. I like mine but I can hear it rusting from inside the house lol.
 

73stallion

Bronco Guru
Joined
Mar 5, 2004
Messages
16,786
Loc.
Eugene, OR
I'm going to start a petition for the aftermarket glass tub makers to build a stretched version. I like mine but I can hear it rusting from inside the house lol.

don't remind me, you're probably hearing mine rust all the way from here in cali....
 
Top