• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Pulley alignment and v-belt setup question

jjintn

New Member
Joined
Nov 21, 2006
Messages
45
Loc.
Johnson City, TN
Replaced the v-belts on my '66 and having a problem getting the power steering pump pulley to line up. It sticks forward about 1/4" further than the crank/water pump. Any quick tips on getting things to line up?

imag0412p.jpg



Also, I replaced the belts with the same ones the PO had on there. I've got one belt wrapping the PS pump, water pump, crank, and alternator, and a one belt that wraps all but the power steering pump. From what I've read on here the only reason to have dual belts on the alternator is if it's a high output. Can anyone see anything in the pics that explains why the PO might have done this, or any reason to switch to a stock belt setup?

imag0427ic.jpg


Thanks,
J
 

Chief Master Sergeant

Retired U.S. Air Force
Joined
Nov 6, 2002
Messages
5,222
Had the same issue and ended up buying a different PS pump pulley from Napa that aligned differently.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,112
Since '66 never had power steering you are not dealing with original parts. So it then comes to what did that pump and bracket come off of? That is likely to be a good starting point of the misalignment. Stuff like this happens when you get one of those part from here and part from there builds. Then when someone whe built it isn't around to answer where they got the parts from then it gets nearly impossible to track it down.
 
Top