• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

quick help...stuck doing new bilstein shocks

blamejane

Bronco Guru
Joined
May 12, 2012
Messages
1,975
Okay guys, the new WH lift comes with the bilstein shocks. I'm installing the front shocks and I'm not sure what to do with the bag of parts. Specifically there are two spacers in the bag for 1 shock. The shocks say type 4 and according to the cryptic instructions I don't think I need the silver spacer on top. But what about the bottom of the shock?

...It came out of the box with a rubber bushing installed, but no metal spacer. So do I need to force one of the metal spacers inside of this bottom bushing, before installing on the bronco?

: P
 

allenfahey

Bronco Guru
Joined
Mar 18, 2004
Messages
2,672
I think you only need the metal bushing if the fit to the stud or bolt is loose. It's just a spacer for the bolt.
 

rguest3

Bronco Guru
Joined
Dec 13, 2012
Messages
3,780
Test fit the metal spacers/bushings onto the lower mounting bolt. One of these should fit snug over bolt. Press the bushing that fits into the lower shock Rubber Bushing and install.

Same with Rear shocks too.
 
OP
OP
blamejane

blamejane

Bronco Guru
Joined
May 12, 2012
Messages
1,975
Thanks for the quick response allen.

rguest3, one spacer did fit so that was it thanks!
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
If you haven't done the rears yet, they are often mounted counter to the fronts, where the body is up and the shaft is down.
The easiest way is to go by the orientation of their decal (which should be on the shock already) or body-up in most cases.

Paul
 
OP
OP
blamejane

blamejane

Bronco Guru
Joined
May 12, 2012
Messages
1,975
If you haven't done the rears yet, they are often mounted counter to the fronts, where the body is up and the shaft is down.
The easiest way is to go by the orientation of their decal (which should be on the shock already) or body-up in most cases.

Paul

Thanks Paul, I will make sure I get them oriented correctly. Good thing you mentioned this as I'm not all that sure I would have noticed. %)
 
OP
OP
blamejane

blamejane

Bronco Guru
Joined
May 12, 2012
Messages
1,975
We have the front completed Chief. I have pictures, but left the camera at my mom's house.:p

We're leaving early this morning to head out to the bronco; hoping to get the rear completely installed. Pics to follow...Wish me luck!

I can't believe the difference 2.5 inches made on the front. It's awesome, we both love it.
 

Chief Master Sergeant

Retired U.S. Air Force
Joined
Nov 6, 2002
Messages
5,222
Good deal. The rear might be easier. You guys know you might have to drill the spring perch holes larger? That slowed me up a bit until I realized it. Did you buy new shackles? If not, that will be fun too.
 

muskrat

Bronco Guru
Joined
Aug 21, 2008
Messages
1,503
We have the front completed Chief. I have pictures, but left the camera at my mom's house.:p

We're leaving early this morning to head out to the bronco; hoping to get the rear completely installed. Pics to follow...Wish me luck!

I can't believe the difference 2.5 inches made on the front. It's awesome, we both love it.

Huge difference, especially when u still have the stock suspension on the rear.
 
OP
OP
blamejane

blamejane

Bronco Guru
Joined
May 12, 2012
Messages
1,975
Huge difference, especially when u still have the stock suspension on the rear.

That's what I thought. I really didn't think a 2.5 inch lift was gonna be that noticeable...boy was I wrong. I wonder if it's the new stance (new front old rear) that accentuates the difference the lift makes. Hey, I'm excited!!

I swear my bronco had a 2 inch lean. Figured it was from the original worn out suspension, who knows but he lean is gone!! I'm gonna look for pictures that show the original lean so I can post the difference.
 

turbotim2

Contributor
____________
Joined
Jun 26, 2003
Messages
2,158
Not to hijack Jane but do you (or anyone else) know the size of the lower front bolt for the shocks? Getting ready to install new Bilsteins too! Thanks!
 
OP
OP
blamejane

blamejane

Bronco Guru
Joined
May 12, 2012
Messages
1,975
Not to hijack Jane but do you (or anyone else) know the size of the lower front bolt for the shocks? Getting ready to install new Bilsteins too! Thanks!

Don't worry about the hijack Tim, I just wish I had an answer for you. I really have no idea. The good news is, you're gonna love your bilsteins! ;D Remember to mount them the correct way, rears were counter-intuitive.
 
Top