• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Random Carb Flooding

commoncold

Full Member
Joined
Jan 15, 2008
Messages
256
Was taking a test drive with the new sway bars when the engine choked, sputtered, then died. I looked inside the primaries on the carb to see a good pint of fuel inside and the primary jets still kickin' out load of fuel. I have no idea what caused this but I would be more satisfied with how to fix it. This is the first time this has ever happened to me with this truck, so I'm new to "break-down" trouble shooting.

I came back about an hour later and turned it over for about 10-20 sec and it finally caught. I drove it home but noticed the engine sounded like it was wanting to die on me a few times.

3 month old carb: Edelbrock 1406 600cfm

Thanks
 

blubuckaroo

Grease Monkey
Joined
Jun 11, 2007
Messages
11,796
Loc.
Ridgefield WA
Sounds like a needle valve is stuck open. Pull the lid on the carb to see. If it looks ok maybe your fuel pressure is too high.
BTW, did you know that the 1406 carb is the leaner version made for low emission? Why did you opt for that one rather than the 1405?
 
OP
OP
C

commoncold

Full Member
Joined
Jan 15, 2008
Messages
256
I went with the 1406 because I didn't need all that much power and any gas mileage I could get was useful (averaging about 14.2 mpg with 351W, 5.5" lift, and 35" Mud Terrains...not too shabby).

I have opened up the carb before many times...in fact I did it earlier today. However, I'm not sure how to remove and clean the needle/seat assembly. I will check this out and get back to you.

Something to consider: I had both main jets (left and right primaries) spurting fuel out, leading me to believe something caused the the fuel level in both the left and right bowl to artificially drop low. Could have been a coincidence for all I know %)
 

ugly74

Bronco abuser
Joined
Apr 17, 2006
Messages
2,856
Loc.
Colorado
I don't think it's a fuel psi problem. if it was, it would flood constantly (except for WOT)
there's a goober floatin around in there.
 
OP
OP
C

commoncold

Full Member
Joined
Jan 15, 2008
Messages
256
*Update*

I pulled the carb apart and kinda figured out the way things go into place. I throughly cleaned the needle and seat plus all the tubing on the top half of the carb. Didn't find much dirt though, only a little on the needle screens.

Drove about 10 miles with only one hiccup (it was because I punched the skinny pedal a bit too hard)

That means it is final. I'm taking my baby to school for the first time! putting the parking pass on the windshield felt so relieving! The last year of spending, stressing, and working on this thing has culminated to this moment. ;D (lets just hope theres no more hiccups :eek: )
 
Top