• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Rear! Leaf Spring Shackle

matt w

Bronco Guru
Joined
Jun 12, 2007
Messages
2,799
OK--I got a brand new 3 inch kit from a reputable company.

It came with bushing for the shackle..I believe and the new buxhings are to big to replace the worn 35 year old bushings in the stock shackle.

Do I need to replace my "stock" shakles now?

Has anyone seen this before?

I am going to call monday but thought I would throw this up to see what the chatter is on this discrepancy.

Thanks ;D
 
Last edited:

Trey Taylor

Full Member
Joined
May 15, 2008
Messages
232
The same thing just happened to me. I had to press out the old bushings leaving the metal outer ring of the old bushing. If the old outside metal ring of the bushing does not come out, put it in a vise and take a hac saw and remove the blade and run it though to hole and reattach the blade and saw a slot though the old bushing so it will have room to collapse alittle and you can drive it on out. I'm still patting myself on the back for this one.
 
OP
OP
matt w

matt w

Bronco Guru
Joined
Jun 12, 2007
Messages
2,799
As mentioned, did you remove the metal sleeve?

......Ok I went back to look at it....it looks like "Two Metal Sleeves" on the shackle, it that correct...and yes that outer sleeve looks like it could be a bear to remove....hmmmmmm.....that's gona take some time!;D......What's the best tip to getting that thing out?%) :eek: ;D ;D ;)
 
OP
OP
matt w

matt w

Bronco Guru
Joined
Jun 12, 2007
Messages
2,799
The same thing just happened to me. I had to press out the old bushings leaving the metal outer ring of the old bushing. If the old outside metal ring of the bushing does not come out, put it in a vise and take a hac saw and remove the blade and run it though to hole and reattach the blade and saw a slot though the old bushing so it will have room to collapse alittle and you can drive it on out. I'm still patting myself on the back for this one.

...I like that ....too bad I gon't have a vice...heh-heh....got a dremal though! :D :D ;)
 

brewchief

Sr. Member
Joined
Feb 11, 2007
Messages
877
......Ok I went back to look at it....it looks like "Two Metal Sleeves" on the shackle, it that correct...and yes that outer sleeve looks like it could be a bear to remove....hmmmmmm.....that's gona take some time!;D......What's the best tip to getting that thing out?%) :eek: ;D ;D ;)

I take the torch and carefully cut it where the shackle is welded, there's a small gap there, once it's cut a big socket used as a punch will drive it right out, I swapped shackle bushings on both sides in about 40 minutes this summer.


Brewchief;D
 

bronko69er

EB Addict
Joined
Oct 16, 2006
Messages
4,599
Loc.
Renton, WA
I've had success with 2 methods:
Sawsall blade to slit the bushing, then pound out with a chisle.
Or, a nice sharp air chisle to cut down through it.
 
OP
OP
matt w

matt w

Bronco Guru
Joined
Jun 12, 2007
Messages
2,799
I've had success with 2 methods:
Sawsall blade to slit the bushing, then pound out with a chisle.
Or, a nice sharp air chisle to cut down through it.


HEY..I think I like this suggestion the best....as I have both tools!;D

Thanks! ;D ;D
 
OP
OP
matt w

matt w

Bronco Guru
Joined
Jun 12, 2007
Messages
2,799
I ain't a cussin man!

I ain't a cussin man! BUT
I STINKIN GAVE UP! %)

Those bushings are "grandfathered" in there!:eek:

I do not own a torch & if a fire was near me I wouls have thrown the 1st one in just to watch it burn!

I am bringing them to a buddy that has a shop and get him to deal with them. SHEESH!! WHAT A JOKE! ..these set me back like CRAZY...lost a night just dinkin around with 36 year old rusted, caked on old bushings!...those new shackles from wild horses have my name on em!..we'll see how my buddy does on Friday...he'll work em out..while I do my best desk-jockey manuevers! heh-heh....Man I am still upset..did I say what a JOKE!?;D%) %) %) %)...AND did I say Sheeesh!?
 

NicksTrix

Bronco Guru
Joined
Aug 1, 2001
Messages
6,410
step up and get the new ones.. they are calling your name...time for parts designed to be serviced.

shameless plug.... ;)
 

Attachments

  • NT_springshak_01.jpg
    NT_springshak_01.jpg
    48.9 KB · Views: 73
OP
OP
matt w

matt w

Bronco Guru
Joined
Jun 12, 2007
Messages
2,799
step up and get the new ones.. they are calling your name...time for parts designed to be serviced.

shameless plug.... ;)

150.00 $$ plus shipping though? :eek: %)

If they were 1/2 that I would have ordered them Monday morning, 4 days ago, after this last weekend ...but that's me.

.....maybe if I can't salvage the stock ones...we shall see.;D
 

welndmn

Bronco Guru
Joined
Nov 12, 2001
Messages
2,112
Get a small propane torch, they cost like 10$.
Just hold it up and light the bushing on fire, burn baby burn!
You will the bushing slowly melt out. Just take a hammer and keep hitting it evey so often while its on fire.
It will come out.
 
OP
OP
matt w

matt w

Bronco Guru
Joined
Jun 12, 2007
Messages
2,799
Get a small propane torch, they cost like 10$.
Just hold it up and light the bushing on fire, burn baby burn!
You will the bushing slowly melt out. Just take a hammer and keep hitting it evey so often while its on fire.
It will come out.

Thanks man....I'm already at work, I am gonna takea break this morning and take them to a friends shop..and TELL him to torch it and work the shackle over! ;D :D ;)

By this afternoon it will have submitted to my will!%)
 

Mark

Contributor
Bronco Klutz
Joined
Aug 29, 2003
Messages
5,417
Loc.
NW Indiana
Get a small propane torch, they cost like 10$.
Just hold it up and light the bushing on fire, burn baby burn!
You will the bushing slowly melt out. Just take a hammer and keep hitting it evey so often while its on fire.
It will come out.
Yes, the inner sleeve will melt out with the old bushing. Let the fire melt it and you can push it out with a screw driver, but the outersleeve will have to be chiseled out.
 
OP
OP
matt w

matt w

Bronco Guru
Joined
Jun 12, 2007
Messages
2,799
It's DONE! ;D

Took it to a buddy with a press and short order was made of those encrusted demons!

I knew they would come around to my way of thinkin!;D ;D

On with the lift!!

Any other issues on the front end I don't know about yet!??

:eek: %) ;D ;)
 

DSGStang

Jr. Member
Joined
Jan 22, 2008
Messages
99
Loc.
Katy, TX
I started in the front and am working my way to the back... just need to get one more busted bolt out of the radius arm to get the front wrapped up.

If you are replacing traction arm bushings as well it will be similar but no outer sleave. I cut the rubber "lip" off one side then drilled a bunch of holes through the bushing, then took a hammer and chisal to get the bushings out.

I guess I'll have to worry about getting the back bushings out soon... I'll be sure to have enough beer on standby.
 
Top