• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Removing Ignition Switch?

ksbronco75

Contributor
Full Member
Joined
Sep 6, 2010
Messages
317
Ive been trying to get this damn ignition switch off for about an hour. Ive looked at videos, tech articles, and all that. I got the cylinder to turn using a paper clip, but i can't get it out still, it has play back and forth, but wont come out. Patients is wearing thing so im taking a break and reaching out. HELP!
 

marty

Sr. Member
Joined
Apr 18, 2008
Messages
867
Loc.
massapequa, n.y.
you push the paper clip in then turn the key tumbler to the accessory position and then pull straight out. once that is out you can reach behind and grab the switch itself and push in and twist. becareful because i think from what i remember it is spring loaded too.
 
OP
OP
ksbronco75

ksbronco75

Contributor
Full Member
Joined
Sep 6, 2010
Messages
317
GOT IT. had to apply pressure to back of switch and the cylinder popped out.
 
Top