Rocker switch's

[broncobeast75]

I am going to be installing about 6 rocker switches and I was wondering if anyone bought their setup already pre-wired or bought the switches then made their own bracket. I like the switches that over the river and threw the woods has (otrattw.com) but they dont sell a bracket. Painless performance sells a bracket with rockers but they are not the rockers I would like to have. what is your opinion or what do you run?

 

[Hozr]

Those switches are Carling contura IV's and you can get them all over the place. Here is a 6 switch panel for them.

http://www.manventureoutpost.com/pr...on-Contura-Switch-Mounting-Panels-(8260).html

and they also make modular panels that you can add or subract pieces from. You can also buy just the switch covers with various labels on them. I get mine from the pacer group in Florida.

 

[kholding]

I bought mine at this place. By far the best selection of brackets/switches/colors/etc...
http://www.danamarineproducts.com/G...=5cf0ce0-9144be6b-cdc0-42d4-8d78-7f10cdb5691a

 

[broncobeast75]

thank you for the reply this helps out a lot

 

[DEEPWOODS]

Look at my build post #16 PIC ,The switches and mounts came from www.otrattw.com they had the best prices I could find

 

[AaronB]

'nother vote for www.otrattw.com

 

[broncobeast75]

Look at my build post #16 PIC ,The switches and mounts came from www.otrattw.com they had the best prices I could find

That is exactly what I was wanting to do. Where do they have the mounts located on their site?

 

[Kyle.malone]

I bought mine at this place. By far the best selection of brackets/switches/colors/etc...
http://www.danamarineproducts.com/G...=5cf0ce0-9144be6b-cdc0-42d4-8d78-7f10cdb5691a

I also vote for dana marine products!!! You can get them to scribe what each switch represents above the switch or below it. I am running them and have other products from them on my bronco and also on my boat (I use to own before my twins - 29' Baja outlaw)

 

[Broncofan76]

x3 on OTRATTW.
I have gotten 2 sets of switches from them and Jim was really helpful. He laser etched the custom symbols on the carling contura II rockers for me. IIRC he also sells the panels for those switches if you want to cut a big rectangle in the dash or fill the stereo hole. I cut 6 rectangular holes in the dash for mine.
I'll use OTRATTW again for sure.

 

[broncobeast75]

has anyone ordered anything lately off of otrattw. I have tried to call them and they did not pick up. I called several times and emailed them several times.

 

[ransil]

use these to mount the carlington rockers

http://order.waytekwire.com/productdetail2/M50/44387/MOUNTING PANEL END - REVISED/

http://www.carlingtech.com/pdf/v_sercontaccess.pdf

 

[Hozr]

has anyone ordered anything lately off of otrattw. I have tried to call them and they did not pick up. I called several times and emailed them several times.

I emailed about a custom switch the other day and they responded within 20 minutes and then added it to the website within 5 so I could order it. It was made within 3 days and shipped yesterday.

I'd suggest email!!!!!

OTRATTW FTW

 

[Greg_B]

Those guys are the best. Here is a switch panel I just took out if mine if you are interested. Holds 4 switches and a couple of LEDs.

The silver one I just built and installed.