• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Sanding advise

NSG

Jr. Member
Joined
Mar 13, 2012
Messages
142
Ive removed everything from inside the cab and am wanting to get it ready for paint/ bed liner. Would it be better to have someone sandblast it or is this something I could do myself with a sander from home depot?
 

bknbronco

Bronco Guru
Joined
Jan 17, 2011
Messages
4,388
Loc.
North Metro, MN
Depends on how it looks? got pics? If you got a ton of rust then it will be more work. If all you need to do is scuff it for paint then use some 320 grit and a red pad. No need to take it down to bare metal, just scuff for a mechanical bond.

If your gona use liner then use 180 grit.

Blasting will probably run you $150, a sander and some paper will be about $50. up to you, and how it looks now.
 

rjrobin2002

Contributor
Bronco Guru
Joined
Oct 13, 2007
Messages
2,951
Wire wheel on angle grinder works good for bare metal strip. Then wipe with a degreaser and epoxy prime for a perfect bond and rust prevention before liner. Or blast and epoxy prime. I have done both.
 

bknbronco

Bronco Guru
Joined
Jan 17, 2011
Messages
4,388
Loc.
North Metro, MN
Wire wheel on angle grinder works good for bare metal strip. Then wipe with a degreaser and epoxy prime for a perfect bond and rust prevention before liner. Or blast and epoxy prime. I have done both.

Still need to scuff with 320 and red pad before you paint. A whire wheel will only buff the metal and paint will never adhire well.
 

allenfahey

Bronco Guru
Joined
Mar 18, 2004
Messages
2,672
What kind of bedliner are you going to use? Also what condition is the bed in now? Linex or Rhino you can prep to bare metal and they will take it from there. With Raptor they recommend their etch primer either in spray can or spray gun on the bare metal prior to spraying it. It really depends on the current condition of the bed. Either way you don't paint it first but I would recommend painting the outside of the tub prior to bedliner.
 

Pat B

Full Member
Joined
Aug 21, 2012
Messages
154
Take a look at Macro Stripping disc.....Work great with an angle grinder

Pat
 
Top