The alternator bracket needs to be notched to allow for the 3G. Mounting it on the drivers side will present problems with clearence of the hood and wiring to the battery. The mount bracket above the PS pump is for the AC compressor. Using a Sanden 508 converted to a self oiler works best for on board air and the serp setup mainly cause they already are serp compatable, small, and readily available (they are the choice of all these after market hot rod AC kits). As for the radiator, just move the lower radiator brackets forward so as to clear the brackets. Use an air chisel to remove the old mounts and 2 pieces of angel iron welded to the frame to move the frame forward.











