Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.
This is where all the old posts go so they can still be used for reference and searched.
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
same setup I have (35's though), and I have thought about putting glass on and stuffing 37's in there. What do your inner fenders look like? (do you have inner fenders?)
same setup I have (35's though), and I have thought about putting glass on and stuffing 37's in there. What do your inner fenders look like? (do you have inner fenders?)
No inner fenders in the front, I have a tubular core support. In the rear its the stock wheel tubs that I've trimmed the pinch seams quite a bit. I need to do a little more trimming back there though, my tires get siped a little on full-stuff ;D
Rcv's were on my short list but have decided the money is better spent starting to build either a custom 9" housing or going Dana 60 I want to run 40's eventually so it's inevitable that I upgrade