Show me 'em 37's

[NYLES]

state ya lift if ya would!

 

[Mountain Ram]

4.5" Deaver springs, custom lopng arms, 3" body lift & 37x14.5 Toyo MTs on 15x10 Gamblers with 4" BS and 2" spacers

 

[shamu]

5.5 inch Wild Horses coils, WH long arms, WH 4.5 inch rear lief springs, WH fender flares, WH shocks and the general cutting on the inner fenders to save the tires from being ripped to shreads.
Tires 37" Maxxis on 17" wheels 4" back spacing.
That help brother?

 

[NYLES]

I think I could do it, make up for some lift with higher cut outs....come on show us the RAM!

 

[GRN_MEANIE]

3.5 susp 2 body - Full Width Axles, 17" Dodge Wheels

https://fbcdn-sphotos-a.akamaihd.ne...055330673106_1539767145_2310643_6467276_n.jpg

 

[Ensane13]

Are you running wheel spacers shamu? Or do the 17" rims with a 4" back clear everything just fine? I'm looking at adding a new set and I am concerned about clearance.

 

[NYLES]

Shamu no body lift? you got a pic with it on the ground?

 

[NYLES]

3.5 susp 2 body - Full Width Axles, 17" Dodge Wheels

https://fbcdn-sphotos-a.akamaihd.ne...055330673106_1539767145_2310643_6467276_n.jpg

wheels make it look like reg axles fer a sec!...i like it!

 

[Mountain Ram]

I think I could do it, make up for some lift with higher cut outs....come on show us the RAM!

Only cuz its your thread and you asked nice... ;D

'94 Ram, Tons 5.13s & detroits, 50" longarms, full hydro steering, dual cases 44s, dual 12k winches and recently went to 16" coilovers up front. 100% built by me.

 

[NYLES]

I like it!

 

[sprdv1]

Oh lord. Spending all that refund $$$ ain't ya. U craxk me up

 

[broncobsession]

One is 37x12.5 MTRs (old style)
Next is 37x13.5 pitbull rockers
4.5" WH coils in front, 2 add a leafs in back

 

[GRN_MEANIE]

wheels make it look like reg axles fer a sec!...i like it!

https://fbcdn-sphotos-a.akamaihd.ne...2315857066103_1539767145_2598091_162728_n.jpg

Thanks, here's a shot from the back.

 

[motoman]

WH 5.5 Sus 2.5 Body 37"x12.50x15 Super Swamper SSR

 

[swampu]

Nyles, good luck with the lift. I used cage f250 springs with bkg radius arms and a full width dana 44 high pinion. Dom steering and track bar with a steering arm from a f150 or f250 im not sure. The rear is a 5.5" spring pack with a 2" block and it's still to low to match the front. When I get my winch and bumper is should level out. Here's some pictures.

side view

Ohyea, tires are 38.5 boggers on 16.5 rims

 

[sprdv1]

Only cuz its your thread and you asked nice... ;D

'94 Ram, Tons 5.13s & detroits, 50" longarms, full hydro steering, dual cases 44s, dual 12k winches and recently went to 16" coilovers up front. 100% built by me.

Nice looking set up...

 

[shamu]

No body lift

 

[ford man]

bronco on 37s

Good year 37x12.50x15" 6.5" BC front coils WH 5.5" rear leafs WH long arms no body lift.

 

[HGM]

Good year 37x12.50x15" 6.5" BC front coils WH 5.5" rear leafs WH long arms no body lift.

You dont happen to park it in a garage do you?;D That first pic is what I'm looking for.. Looks good!

 

[Kyle.malone]

How bout this.. 5 1/2" springs. 3 1/2" leaf springs on spring rockers. 1" body lift
17x10 3.75 backspacing Raceline beadlocks with 37" x 13.50 Pitbull Rockers. I also have 1 1/2" spacers on it.