Show me your dash.

[msweb]

Did someone say AUTOMETER????
You dont have to be good at wirin' if you use mechanical gauges. I trust them a lot more.

I have to agree with you on the feeling of trust with mechanicals over electronics with sending units BUT make sure you use an isolater for your fuel pressure and oil pressure. If that line ever breaks inide the cab, you're in a world of hurt!

 

[Bronco Ben]

ok if you really want to see it! ;D

 

[Frankenhorse]

Patch the radio hole get rid of the glovebox cover and theres mine right now also off the truck.

 

[j.r.nice]

I have to agree with you on the feeling of trust with mechanicals over electronics with sending units BUT make sure you use an isolater for your fuel pressure and oil pressure. If that line ever breaks inide the cab, you're in a world of hurt!

Agreed.....I have an isolator on the fuel, not on the oil.....but it has a braided line.

 

[Miley]

I like 'em simple...

Here's mine.

You got me! It's an old picture. Actually, I've replaced the switches on the driver side with a 6.5" Infinity speaker, and also put one where the old glove box used to be.

I've got two rollbar pods to mount the EGT and Boost guages into. ;D

Guages are cool... huh, huh, huh

James

 

[supermottl]

here's my new layout, with 6 autometers, stock knobs, and tuffy glove, pioneer CD. These were posted in that link too...

 

[bmcqueen]

work in progress...

 

[supermottl]

Are those AC/Heat vents? Those are sweet!
What is that climate control setup from!? Sweet!

 

[bmcqueen]

Vintage Air (not Chuck's set-up) with the Vintage Proline louvers (4)...dash layout/mod and install per Nickstrix (forum member).

 

[HotWheels]

Here's a few I'm considering...

Check these out..

 

[yak67]

Here's mine ;D

 

[ctowery]

I think I have a insane dash , sorry I can't post here but you can see the dash by going to the link on my signature....webshots

Cary

 

[watfab]

http://classicbroncos.com/photos/showphoto.php?photo=3343&sort=1&cat=500&page=1

Another one for you, I took my stocker and cut and welded filler panels into all of the holes. The worst one was the huge hole that someone took a hammer and chisel to make the radio mount hole. :'( I moved the ashtray and the glovebox over and I used some exhaust tube to make some cutouts for the roll cage to keep it tight to the windshield and front door post.

 

[YelloTx73]

I think I have a insane dash , sorry I can't post here but you can see the dash by going to the link on my signature....webshots

Cary

Hey that looks like the NASA dash. ;D

 

[firemand]

some pics of mine it is an overlay that I got powdercoated to match the Tuffy

 

[PPiazza]

One of my biggest regrets is selling my dash with my 72. If I would have known I was going to get another rig so fast I would have kept it. Its not to tuff to make one just time consuming.

Here is a pic

 

[4x4Alaska]

here's my dash from the po...it's gonna get ripped out and replaced with a stock one this summer...I'll probably post it up for sale this summer if anyone is interested..

 

[cracker]

Just what I need, something else to consider while I have the EB torn down. Its not like I have to have a new dash, but......... all of those updated dash's have me thinking, and thatis a dangerous thing.... ;D

 

[Frankenhorse]

Some awsome work and some that need work. I like the split on supermottl's dash. Mayby something simmilar but I see others that I like to.

 

[Frankenhorse]

Hey I see a beanbag ashtray in one of those pics from Hotwheels. Dont see much of those here in Ca. ;D