Show me your......high lift jack locations

[BAMA]

I have a 48" high lift jack and have no clue where to mount it. With the winch up front and the spare in the back I need more options.

 

[joser]

Here is mine. I used exhaust clamps, then have a HD bike lock for security and extra precaution. Has worked great for a few years now after many trails and big rocks.

 

[bronko69er]

 

[Hoppy]

get their lock mount and mount it to the inner rear fender

 

[BAMA]

Here is mine. I used exhaust clamps, then have a HD bike lock for security and extra precaution. Has worked great for a few years now after many trails and big rocks.

Thats one of the options i thought of too, just didnt think about exhaust clamps. I was gonna mount it right to the quarter panel

 

[73stallion]

welded 2 bolts on the side of my protofab tire rack and took the base off my hi lift. then drilled the bottom bolt and put a small combo lock in it.

 

[Viperwolf1]

Mine rides in here.

 

[fla67]

attach to the cage behind the rear seat.

 

[garberz]

I welded some 3/8" bungs to my tire carrier.

 

[jw0747]

bolted to downleg of roll bar. sorry about all background interference in photo

 

[fungus]

bolted to downleg of roll bar. sorry about all background interference in photo

I did the same exact thing and mine's a 60". I welded allthread to the rollbar down tube and put suspension bushings between the hi-lift and the rollbar. Fits under the hardtop and safari top just fine and I don't even wack my grape on it as mine is on the driver's side w/ my powertank on the pass side downtube.

And of'course I can't find a single pic of it...?:?

 

[tasker]

how many beers ya got? ;D

 

[deltarat]

Here's the way Bullet mounted his.

 

[cody72sport]

bolted to downleg of roll bar. sorry about all background interference in photo

did you make that rear cage?

 

[Louie]

get their lock mount and mount it to the inner rear fender

Has anyone done this? I wonder if it would stick out very far?

 

[ken75ranger]

On the tire carrier.

 

[ochretoe]

I'm working on a reciever hitch mount. That way I can put it in my from reciever most of the time but move it to the back of need be when my carry all is up front. No pics yet I can't find any 2x2 tube to finnish it up with.

 

[stout22]

High lift

Mines on the tire carrier also. 2 pins to locate the footplate and one bolt (yellow in picture) to hold it on.

 

[DRBRONCO69]

Here is mine...............sorry couldn't resist.

 

[ochretoe]

Here is mine...............sorry couldn't resist.

Damn. I would hate to be where that landed.