• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Steering issue

micon

New Member
Joined
Aug 21, 2023
Messages
24
73 bronco with power steering. New ps pump and new column. Make noise turning. Also stiff turning.almost stuck completely during left turn this morning.
what’s going on?
 

garberz

Bronco Influencer
Joined
Jun 24, 2007
Messages
6,864
Loc.
Conejo Valley, Ca.
Power steering pumps are considered consumable. That's why steering gear rebuilders recommend a power steering filter. It's possible your previous pump has deposited debris into your steering box.

Mark
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,622
What kind of noise is it making?
Steering pump wine?
Grinding from the steering column?
Squeaking from the column?
Why did you replace the pump?
Why did you replace the column?
What kind of column is it?
What kind of pump is it?
What else has been done to the Bronco?
What size tires?
What size wheels and what offset?
Any suspension lift?
Any modifications to the steering linkage?

These are just some of the questions you need to answer to give us a little better chance of diagnosing.

Off hand, the first thing I would suspect is that there is still air in the hydraulic system. When you put the new pump on, and presumably new fluid, did you raise the tires off the ground even slightly, and turn the steering wheel back-and-forth 50 or 100 times?
Yes, the instructions say you should be able to turn it left and right perhaps 10 times. But most of us have found it takes 100 or more.
 
Top