• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

stuck twin stick

joe

Bronco Guru
Joined
Sep 9, 2001
Messages
1,932
I got my rear twin stick stuck in high and cant seem to get her out, once I got it in nutrall with the front in low but thets about it. any thoughts please? ?:?
 

Fishmanndotcom

Full Member
Joined
Sep 19, 2005
Messages
246
Loc.
senoia, GA
you try rolling forward and backward? make sure there is no tnesion on the t-case when trying to switch gears. also make sure your shifter rod isn't bent, very doubtrful but anything is possible

-cutts-
 
OP
OP
joe

joe

Bronco Guru
Joined
Sep 9, 2001
Messages
1,932
welndmn said:
T or J shift?
good question, just got the 72 last cristmas. being a 72 then is it a t-shift ?:?
 

JB Fab

Sponsor/Vendor
Bronco Guru
Joined
Mar 21, 2004
Messages
1,516
When you installed it did you shim-up the detent springs to make it hold the shift positions better?
Sometimes a little too much shim will make it very difficult to shift.
Jon
 
Top