• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Temperature sensor

Braddw25

Full Member
Joined
Jan 23, 2009
Messages
287
Loc.
Jersey Shore, PA
I need help with Ford temperature sensors like the one in my '71 Bronco. I've been told 2 entirely different things by different people and I want to make sure I'm going about this right. So is the temp sensor a thermistor (variable resistor) or a thermocouple which produces a voltage when temp changes. I always thought that it was a resistor (thermister) whose resistance changed when heated. Mine is not working and here is what I did to test it. I took the wire off the end of the sensor and tested it for voltage. It reads around 5V. I then shorted from the connector to my negative battery terminal which caused the temperature gage to peg all the way over to hot. My thinking is that this means everything besides the sensor is working as it should and it's just the sensor that needs replaced. A buddy told me that that sensor should produce it's own voltage when hot, and therefore there should be no voltage in the wire when it's disconnected. He thinks I have a wiring problem. Can somebody here tell me which is correct please? Thank you!!
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
You need the resistance type. The bronco gauges work off resistance thats why the guage pegs when grounded and thats why you have power at the sending wire.
Usually its only the later temp sensors that are used in EFI engines that may produce a voltage for the computer. most of these engines still use a regular sending unit for the guages tho.
Key works here may be sending unit and sensor sort of different meanings
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
I need help with Ford temperature sensors like the one in my '71 Bronco. I've been told 2 entirely different things by different people and I want to make sure I'm going about this right. So is the temp sensor a thermistor (variable resistor) or a thermocouple which produces a voltage when temp changes. I always thought that it was a resistor (thermister) whose resistance changed when heated. Mine is not working and here is what I did to test it. I took the wire off the end of the sensor and tested it for voltage. It reads around 5V. I then shorted from the connector to my negative battery terminal which caused the temperature gage to peg all the way over to hot. My thinking is that this means everything besides the sensor is working as it should and it's just the sensor that needs replaced. A buddy told me that that sensor should produce it's own voltage when hot, and therefore there should be no voltage in the wire when it's disconnected. He thinks I have a wiring problem. Can somebody here tell me which is correct please? Thank you!!

You are correct. The sensor is a thermistor with a negative temperature coefficient. That means resistance decreases as temp increases. Decreased resistance allows more current to flow. More current heats the gauge spring more, causing higher deflection. A thermocouple would be useless without a signal conditioner and special thermocouple wire.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,112
Often people will use (either by mistake or cheapness) the wrong sensor. The idiot light sensor is common on many donor engines. Many parts store books will list 2 different sensors for the Bronco, one about half the price of the other. the half price one is for the idiot light. The idiot light has no variable to it. It is open until too hot then closes.

Thermocouples are rarely used in the auto world. For them to be accurate it takes a cold junction to get the proper voltage generated. A few are used in exhaust temperture measurements as they can take very high heat very well. But never seen one in a cooling system. Thermocouples are also extremely touchy about connection quality and radio noise.
 
OP
OP
B

Braddw25

Full Member
Joined
Jan 23, 2009
Messages
287
Loc.
Jersey Shore, PA
Thanks very much for the help, gentlemen. I am pretty sure I am on the right track now and that I do not have a wiring problem and that I just need a new sensor. Thanks again!
 
Top