TN The Official 2019 Super Celebration Parts Thread!

[helo-mech]

Looking for 1 rear hub cap.

 

[sk1nw4lk3r]

I can bring a set of deluxe door panels - the soft tufted ones - that I'm not going to be using on my truck. Ready to install in good shape.

Black in color with chrome trim. Were $129 new from Tom's.

$70. [SOLD]

I also have a cooler rack I'd custom made. I wanted to make a hitch mount swing away cooler rack that I could remove whenever I didn't want it on the truck. Built it up -only thing I hadn't finished was a hook to support it on the driver's side of the rack, to carrier some of the weight load, and powder coating it. Had considered selling the idea to a parts house, as one of them had asked me about it, I just decided I didn't have the time or patience to finish it.

Asking $450 for this thing. Willing to listen to reasonable offers on it.

 

[rednck21]

Anyone have a 17 or possibly 18 tooth speedo gear I could buy off them?

 

[70EarlyBronco]

Anyone have a 17 or possibly 18 tooth speedo gear I could buy off them?

I’ll be taking out a 18 tooth at Super Celebration to swap in a 16tooth. Your welcome to have the one I pull out. Seems to work fine, just not accurate for my setup.

 

[RVB]

I will be bringing a 66 eyebrow grill,dash, and two 66 tailgates. one in good shape the other is wall art or use it to make a new tailgate look like a 66.and a running 70 project bronco for sale.
I'm looking for factory 16" steel rims. I need at least 3.
parchment bench seat hinge covers in good to excellent shape.
parchment bench seat belts.

PM'd you.Rex

 

[Gas Pig]

Need a ‘77 hood

Looking for a clean ‘77 hood. Will have cash or bunches of parts to trade with!

Thanks Jeff

 

[jtoney51]

Got some items I will be bringing.
New, still packaged - Windshield - Clear $100.00 SOLD
New, Still Packaged - Front Bucket Seat Hinge Cover - Black $20.00
New - Gray Turn Signal Pads - $10.00
New - Tailgate Latch Striker Bracket - 2 Sets - $15.00 per pair
Windshield Frame - came off 67 - not rusted - decent shape $100.00
Tailgate - Needs Work - will need lower tailgate panel - $50.00
Front Fender Support Brackets - New - $20.00 pair
66-68 - Turn Signal Buckets Lights with Clear Lens, New $20.00
6 Blade Radiator Fan - Used - No Spacer $15.00
Used - Dash out of 67 - radio cut out - no components - $40.00
Emergency Brake Assembly - Rough, one stud broke - $20.00
Metal Door panels - $40.00
Visors - great shape - came off of 67 - $50.00

I will add to the list, this week. Bringing more than listed, lots of small stuff.

Can send pics of anything listed - PM me or text 828-216-5149

We are coming in on Thursday afternoon and staying through Sunday.

Thanks

Jim

 

[blackbirdsc]

factory half cab bulk head. 1" body lift. 4" front lift springs

looking for a half cab bulk head. 1" body lift. and some 4" lift springs for the front. if anyone is looking for 66 hub caps i could part with them.

 

[deltabronco]

I am now looking for a '66 style front bumper. Can be chrome or painted, just needs to be fairly straight. One with narrow bumperette holes would be a plus.

I’ve got a stock black bumper I can bring... will pm you.

 

[Gas Pig]

looking for a half cab bulk head. 1" body lift. and some 4" lift springs for the front. if anyone is looking for 66 hub caps i could part with them.

Hey please text me a picture or two of your ‘66 caps.

We should have 4” spring coils that your looking for.

PM me or text 216-571-6843

Thanks Jeff

 

[tailpipe]

looking for a half cab bulk head. 1" body lift. and some 4" lift springs for the front. if anyone is looking for 66 hub caps i could part with them.

I'm always late to the game when 66 hub caps show up Sent a PM regardless...

 

[rednck21]

I’m bringing a bunch of NOS 9” and D44 (I think) axle parts....bearings, races, carriers, etc and a 4.10 9” gearset. Would like to sell in a lot to the best offer...

 

[sk1nw4lk3r]

I will also have a handful of both of these steel cutouts leftover from last year that I will bring down with me. $20/ea

 

[clarrance]

77 Set of Doors-they have been dipped and are in good shape. Window frames welded on.

Dennis Carpenter Set of doors(no window frame. These are brand new with a some dings from shipping.

Tailgate- it has been dipped. There were a few small holes after dipping that have been fixed

Pair of front fenders-they have been dipped. No rust but not perfect.

Hood-it has been dipped too. It has a silver dollar sized spot on top

C4 with PTO



Hard Top from 73 with luggage rack- the top and roof rack are rough. The lift gate is rusted at the bottom.

Rear bench- from 73 Ranger. It is alvocado and is complete.

I have other pieces of the alvocado interior. The bucket seat bottoms are shot. If you are needing an odd piece or two please let me know and if I have it I will send pics.

Complete set of factory seat belts.

Windshield Frame- dipped. It is not perfect but solid.

Before pricing, I am more interested in trading for what we need.

Need:

Complete Brown Ranger interior. Dash pad, Seat covers, door panels, arm rests, dash, rear seat upholstery and arm rests, rear quarters. We don’t want new. It is going in a truck with patina. Will take it complete or pieces

Rear Tire carrier-if you have one in original limestone green we are will to pay more.FOUND

White Ranger spare tire cover. Will consider any usable condition.FOUND

Header for factory 302. New or very close to.

Front original chrome bumper- going on patina truck so it doesn’t need to show new.

Original Radio- prefer working but will consider non working.FOUND

2 1/2 lift. No dual shock set ups please.

Power front disc brake conversion set up. Nothing put together from a junkyard please. Currently has non power drums.

Set of Bilsteins

White Soft Top- prefer Rampage

We will be coming down early Friday and leaving Saturday late afternoon. I will only be bring the parts that are sold or traded pending visual inspection that parts are consistent with pictures. Any commitment to trades will be pending mutual inspection. Preference is to trade. Feel free to communicate by text and I can send pictures by text. I am a paying member here but my limited computer skills prohibit me from posting them here. I will put up prices next week if there are not trades available

540-597-7790

Thank you

T

I have 1977 brown/saddle color Ranger rear seat in perfect condition, and front brown Ranger seat covers. The front seat covers have some wear on the lower sections if I remember right. I’ll take $400 for everything

 

[BajaFresh75]

I have a fiberglass half cab top in decent condition. It's the one with no rain gutter. Don't know Brand. Currently in Camo paint $350.00
Also, have a steel half cab top in average condition, still in Wimbledon White. $400.00
I have two bulkheads in average condition. $80.00 each
Moser rear disc brake kit New In Box bolt on style $325.00, think it's $550 online.
No pics currently. I'll take and post some today or tonight.

 

[c17jack]

I sent you a PM about wheels & tires. I'll take them if you still have them

I have a set of 5 BFG 33/12.5/15 on 15x10 Eagle? wheels. spare is brand new, others have prob 300 miles/excellent cond. $1100
View attachment 474876
I'm also open to trades, I'll make a list of some items
EB 9"
c4 tranny

also have a custom aluminum tank I built for a customer that backed out
this one is 1/8" tread/21 gal/bronco send unit/no baffle/ with mount strap/has supply fitting,drain plug $425
View attachment 474877

used tailgate, looks like very little rust, but has dent/dings OBO
View attachment 474878

View attachment 474879

 

[ford man]

parts wanted

1st I would like to fine a original paint mallard green tailgate. The same color as the one pictured on rear of trailer. I would be interested in other body parts too that are same color original paint.


2nd I would like to fine a 1974 Brook Blue original paint right fender and hood. I posted a pic of the brook blue color bronco too.


3rd I need cactus smasher for a 1979 bronco


4th I need front bucket seats with original parchment covers usable condition.

 

[Tedster100]

Lots of Parts

I'm cleaning out a lot of parts I've collected.

Modified half cab - has a gate on the back instead of a window. It's rust free with a couple scratches and dents and the gate doesn't latch but it's got a lot of potential. $800

Mustang GT 5.0 motor. I picked this up for a build and didn't end up using it. It is a brand new, never fired summit short block, new stainless headers, new valve covers. It's very clean with a lot of new parts including the complete wiring harness from the Mustang and the A9L computer. It's basically plug & play. I will bring it to Super Cel if someone buys it. $2,900. $300 deposit by paypal will be required. I will include the engine stand so it will be easier to transport.

C4 with Dana 20. Good shape but I have not run it so I'm selling cheap and as-is. $400

Ford truck 351 lower, BC adapter and mustang upper including the intake for fuel injection conversion. It's been powder coated and looks great. $300

Vintage Meyer plow, has some rust but is clean and straight. $500

Two Mazda M5OD transmissions. Great for putting a 5 speed in your Bronco. A NP205 will bolt right up with a little modification. See the write-up on Classic for installing a ZF, it's almost the same unit. $300 each. That's basically the price of a core, I haven't run these so they are sold as is.

Two tailgates - rough but useable $100 each.

Two doors - really rough but have windows and internals. Would make good garage art if you painted a logo on them or use for parts. $100 each.

Two full size Dana 44 front axles. Neither is complete, one is missing an axle but both have knuckles. $250 each. SOLD

Bulkhead for half cab, it looks like it was raptor lined and painted orange. No rust. $300

Aluminium truck 351 lower $75

GT40 5.0 lower $100

I don't always have access to my phone / internet so PM me with your phone number if you're interested and I'll get back to you as soon as I can. Text is best for me most of the time.

 

[mudstud]

39.5X13.50X17 Irok radials for sale or trade

Set of 4 15X7 slots only

2 15X7 slots they are different and could be spares for someone

 

[bamabaja]

Hey Ted: PM sent on motor and 1/2 cab