"The Turd" build Thread...

[broncokak]

I'll get Todd to check his resource again and see if he can come up with wire colors for the PATS key receiver and the OBDII plug.

 

[Scoop]

Steve, hope this works out - I want to see the Turd on the trail!! ;D

 

[76MaBronco]

You and me both Gary. The whole idea was to get it ready so I could wheel with the fam...being a spectator or a lucky passenger in someones rig while the fam sits are the RV isn't sitting with me too well...

The wife says bring the Jeep down. To me that's like entering a baking contest with a loaf of Wonder Bread...;D

 

[76MaBronco]

WILL LOOK AROUND up here, i'll find one

Standard Auto Wrecking in Worcester has them...$50. I just need the part number to match up to a similar computer to make it run...getting them isn't the issue, it's getting the RIGHT one that matters...the one I have off the 351 for the '66 has three rows of plugs, the Explorer has 4...

 

[tasker]

F77F-12A650-BLC is the engineering number on my 97 with no pats and 302 aod

 

[broncoitis]

Good Luck! Sounds like working with the explorer stuff is a pain in the butt to say the least. Good Luck you will get it running. Have faith!!! ;D

 

[76MaBronco]

F77F-12A650-BLC is the engineering number on my 97 with no pats and 302 aod

LKQ has one out of a '97 Mounty for $75 right down the road. Sending the wife to get it now (and crossing my fingers)...

Will still need the wire pinouts for the OBDII. Thanks!!

 

[tasker]

KEEP me in the loop, closed loop! (obdII reference)

 

[broncokak]

Steve,

I just talked to Todd. He says make sure what ever you get for a new computer has the 100 pin connector. Some are only 60 pins so they obviously will not work. He’s going to look up your OBDII plug wire colors tonight after work

 

[76MaBronco]

Thanks!! I'll pass that on to the wife...

 

[fatboy]

I have a 97 mountaineer donor that is not donating currently! The box is your to use for now if that helps!

 

[76MaBronco]

The wife already picked it up...it has the number Randy posted and 104 pins...only time until I can get home and plug it in to see if it works. After dinner and T-Ball practice that is...

Thanks though!!!

 

[tasker]

WHAT SITE number again? i need to call!

 

[76MaBronco]

4...Sean's on 3...

 

[sprdv1]

I remember the t ball days. Seems like a long, long time ago. They grow too fast

 

[76MaBronco]

YEEEEEEHAAAAAAAAAAAAAAAAAAAAAAAAAA!!!!!!!!!!!!!!!!!!!!!!

[youtube]2HcmpYZWzqc[/youtube]

 

[bronco loco]

YEEEEEEHAAAAAAAAAAAAAAAAAAAAAAAAAA!!!!!!!!!!!!!!!!!!!!!!

[youtube]2HcmpYZWzqc[/youtube]

I'm so glad you got it running, CONGRATULATIONS!!!!!

 

[fatboy]

Good news Steve! Glad I bought the 97 as a donor then! Hope you know how to strip out my harness...;D

 

[76MaBronco]

Me too Marco!! Holy Damn what a weight off my shoulders...

Pete, the harness is easy...just cut it off at the firewall...I'll be taking some notes and put them on here for a reference...

A few small vacuum leaks and boy, she's a quiet runner...I'll be keeping it somewhat loud with a Flowmaster Super 40...

 

[fatboy]

I hope it went as easy as plug and play!