Jerrod4567
Sr. Member
Any of you running any style heim joint steering system could you please post pics?
Thanks
Thanks
I made my own out of DOM, it was surprisingly easy and cheap (well not the heims) but definitely cheaper than the aftermarket kits. Check out my build thread on the stretch. I think I spent like 60 on tube and 175 on bungs and heims. This was for tie rod, drag link and track bar. The weld in bungs make it easy to set up.
Here it is
whbat's the advantage of left hand thread on the ends?
Looks good, I was also thinking I could save a ton of money building my own, thats why im looking for pics of everyones setups. Thanks and keep em comin. One question, why use the bungs and not just tap the end of the shaft? Is the ID too large for the size heims you used?
I built my own using some 1.5 x .250 wall DOM. I used the 1 ton TRE's though. I had to buy a 20' stick of the DOM and still have enough to build another set up. Let me know if you need some.