Those running D60s with 5 on 5.5 bolt pattern, which method did you use?

[rjlougee]

Will those work? I don't know all the interchanges.

The F250 and F350 TTB front ends had Dana 50 front ends, but there are two different kinds. The standard duty uses the D44 outers and the wrong spindles. The D50 HD uses the 5 bolt spindle and D60 hub/rotor setups with 30 spline outers/locking hubs. If you look behind the knuckle you can count the spindle bolts, if the number is 5, you're good. IIRC the others are 8 bolt spindles.
Joe