• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Tick Tick Tick!

Okie69

Contributor
Sr. Member
Joined
Nov 28, 2011
Messages
842
So I Just swapped out my blown (the bad kind of blown not the cool kind!) 302 for a new (to me) 302 and I've got a loud tick tick tick it sounds like it is coming from the very front of the motor. A buddy said he was almost sure it was the fuel pump. It's the stock fuel pump. So my question is does that sound right to you guys? The fuel pump worked fine with no tick tick on the old motor.

Thanks in advance!


Since I know how much everyone loves pictures I added a few I took during the swap!
 

Attachments

  • IMG_1237.jpg
    IMG_1237.jpg
    113.1 KB · Views: 101
  • IMG_1239.jpg
    IMG_1239.jpg
    110.8 KB · Views: 98
  • IMG_1290.jpg
    IMG_1290.jpg
    123.6 KB · Views: 103

ryansbronco

Bronco Guru
Joined
Mar 6, 2002
Messages
1,160
Loc.
The place of bronco
It could be the fuel pump concentric hitting the timing chin cover. You could pull the pump out and run it with gravity feed fuel. To see if the noise is still up front.
 
OP
OP
Okie69

Okie69

Contributor
Sr. Member
Joined
Nov 28, 2011
Messages
842
Good Idea! I'm not the most seasoned mechanic and I'm trying to do everything I can without hiring someone so thanks for the help!
 

jim3326

Bronco Guru
Joined
Jul 12, 2010
Messages
1,781
Loc.
Appleturkey
Sounds (reads%)) like a stuck lifter to me. The front left seems to get the least oil when running it with the cutout rocker covers. If it sat for a long time with that lifter under compression it may have collapsed it.

Jim W.
 

Oakland Bronco

Sr. Member
Joined
May 13, 2010
Messages
721
Loc.
San Francisco, CA
I'm not a mechanic, and don't know what your ticking sounds like, but I had a ticking issue due to a vacuum leak on my passenger side exhaust manifold. Thankfully, I had already purchased shorty headers and, once installed, the ticking ceased.

Good luck!
 

TwoDalesDad

Bronco Guru
Joined
Jul 19, 2011
Messages
1,515
MARVEL Mystery oil...Sometimes Cleans Muck off Crusty Lifterz...The Other Way Is a Quart of ATF...Run it for a bit...see if that helpz...
 
OP
OP
Okie69

Okie69

Contributor
Sr. Member
Joined
Nov 28, 2011
Messages
842
So being the Gurus that you all are, what would you do first? I understand that you can't hear what it sounds like exactly, but if you had to say...
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
Determine where the noise is coming from by using a stethescope or three ft long pc of dowel. Put the probe or dowel against the suspected areas and find out where the noise is coming from...
 
OP
OP
Okie69

Okie69

Contributor
Sr. Member
Joined
Nov 28, 2011
Messages
842
Great idea. That's what I'll do first, thanks!
 

Timmy390

Contributor
Bronco Guru
Joined
Jan 1, 2011
Messages
5,948
Loc.
Conway, AR
Pull the valve covers and turn the engine over by hand and watch the valve train. If you have a bad lifter or a bent push rod you will see it. Check the push rods as you go.

Quick and easy......

Tim
 

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,969
Loc.
Hawthorne ca
Not to bring you down but the 351w in our 66 did it after sitting a while. Thought for sure it was a lifter. It ended up being a bad bearing.
 
Top