• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

toggle switches

cbfomoco

Bronco Guru
Joined
Jan 21, 2004
Messages
1,029
Loc.
WV
ok i have been doing some thinking and looking. I have been thinking about changing my dash diff guages, and adding toggel switches and remove other reg factory switches. here is my question how in the world can you do it?? I dont need a buch of info but if i was to get rid of the head light or wiper switch do i then need three for the wiper and at least two for the lights??? how does that work is what i am asking. i dont need wirign digrams or to much info just a kind of basic how too. thanks
 

rob wilson

Sr. Member
Joined
Jul 11, 2004
Messages
536
Loc.
Flagstaff, AZ
The lights can be switched with a switch that is designed as a Off-On-On. I mid project in replacing all the switches on the dash and moving them to a console. Also adding additional switches for Off Road, Crawl, Backup, etc. I'm still going to use the delay wiper switch since any there was not good alternative that would control the wipers, delay and wash. Let me know if you need more info.
 
Top