• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Transfer case transmission removal

RandyP63

Jr. Member
Joined
Sep 5, 2011
Messages
140
Loc.
Ft. Mill, sc
Hey all, I have read some other threads regarding removing both the trans. And transfer case. Is the easiest way just to drop both attached to the crossmember? All that I'm going to do is clean things up and replace some gaskets. Thanks.
 

jmangi62

Bronco Guru
Joined
Jul 28, 2013
Messages
2,512
We just removed the transfer case first then the trans.It was really no big deal,but I think it would be way heavier doing it all at once,oh and we were laying on a cold garage floor too,LOL.Jim. :cool:
 

bronconate68

Sr. Member
Joined
Mar 1, 2005
Messages
361
Loc.
Vancouver, WA
You will have to get the crossmember out of the way. It will make it a lot easier. Just lift the running gear a little with a jack and a block of wood and the crossmember will drop out easy.
 
Top