• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • The Classifieds forum is a place to buy and sell, not an open forum for people to give their opinions on Bronco values. Unless the seller specifically asks for help on pricing, please don't critique quality or asking price. If you're not interested then move on.

    Thanks!
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

PA Transmission and Transfer case

Status
Not open for further replies.

yellowjeep79

New Member
Joined
Jul 4, 2003
Messages
19
Loc.
SW Pennsylvania
I have a manual (standard) 3 speed transmission and Dana 20 transfer case (case only) with some gears from, I believe a 67. I also have some shift linkages. The transfercase is missing the big slider gear and the intermediate gear. If you come to Washington PA (intersection of I 70 and I 79), you can have all of it for nothing. I will ship smaller parts like gears etc, then I would ask for payment plus shipping charges. my email is: eevans80 @comcast.net but leave out the spaces
 

Bronco Paul

Full Member
Joined
Nov 18, 2006
Messages
266
Sounds like someone did a Jeep upgrade at the expense of a EB??? Sorry...I'm an Early Bronco Bible thumper...for those who don't know... because the gear ratio on an EB Tcase is 2:46 to the Jeep's 2:00 they like to take the gears out of the EB and put them in their Jeep. So...quickly...everyone...hide all of your spare transfer cases!!! Oh...by the way...you can buy the gears from vendors pretty cheap...$50 or so a pop...saves you the hassle of tearing down the case.
 
OP
OP
Y

yellowjeep79

New Member
Joined
Jul 4, 2003
Messages
19
Loc.
SW Pennsylvania
Bronco Paul - good eye, these parts were purchased to snag the big slider gear for a Jeep T-case. Having said that, I would never cut up an EB for parts. I had a '69 when right after high school and loved it. These parts were purchased several years ago from a buddy who was scrapping a severely rusted out Bronc, and I'm offering them on here for free so that some one else might be able to keep their EB alive.
 
Status
Not open for further replies.
Top