barronj
Bronco Guru
- Joined
- Jun 6, 2009
- Messages
- 1,859
I'm putting a ZF 5 speed in right now, and I've switched to JB Fab twin sticks. I'm having trouble finding where neutral is. I just want to make sure I have enough cut out for the twin stick travel, but it seems like it's either all the way out, or all the way in.
Any tips appreciated.
Edit: The front axle stick was binding (heim joint hitting twin stick, so I flipped it over and mounted the heim to the bottom side of the inside/front axle stick), now the front axle has a neutral setting. Rear axle is only low or neutral at this point.
Any tips appreciated.
Edit: The front axle stick was binding (heim joint hitting twin stick, so I flipped it over and mounted the heim to the bottom side of the inside/front axle stick), now the front axle has a neutral setting. Rear axle is only low or neutral at this point.
Last edited:
