The reason for the question is I have a new issue where the engine dies as soon as I put it in drive. It runs great in idle and reverse but dies in drive. First thought was a vacuum leak.
I put a gauge on the manifold and it reads a very steady 20 with no fluctuation at all. I am wanting to avoid a compression test because I have the BCB Headers and you cannot get to all of the plugs with the headers on. I don't want to pull the headers if I don't have to.
I don't have a need to do a compression test other than curiosity of the engine but if the vacuum test shows a good engine, I just wanted to confirm that negates any need to do a compression test. I followed some instructions online for doing a vacuum test and it suggests a good running engine.
Again, this was more of a curiosity question.