• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Vehicle modifications and DOT

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
I decided to start a specific thread about hiem joints and other suspension and bake modifications. Specifically are they DOT approved and or legal to do. I know a few states have some specific restrictive rules but that does not make a case for everyone. Suspension designs and linkages do not have DOT numbers on them, but some brake components do.

My question is are hiem joints for steering and suspension along with general modified aftermarket suspension and brake parts parts illegal? I have heard for decades Yes they are but I have never been able to find or be provided with any documentation that confirms this. I used to own a company that made suspension parts, I could not find it and neither could my attorney. Can anyone show qualified proof that they are in fact illegal? If so there is a multi billion dollar industry that is in fact breaking the law.

Anyone have any proof?
 

76YETI

Contributor
Sr. Member
Joined
May 27, 2015
Messages
932
Loc.
KC METRO
I’ve also heard that, in Kansas there is no regulations for passenger cars and trucks. I have had vehicles inspected to get registered and they have never looked at those parts. It may be a regulation for tractor trailers but I doubt it. A good attorney may look at the “upgrades” if ur at fault in an accident but most people wouldn’t know where or what to look at....
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
Well you have to go further, not only is there DOT but FMVSS (and that doesn't count EPA). There are several various regulations. MOST have to do with qualifying a vehicle for sale. But very little to do with haw the vehicle is maintained or modified after the sale. This isn't resale, this is initial sale to the first owner only.

DOT is Department Of Transport. It has to deal with commercial transport across state lines. Nothing to do with non-commercial vehicles. My SCUBA tanks are regulated by DOT, but it only matters if they are in commercial service and crossing state lines. For personal use, do with as I like. Dive shops have to care more since they are a commercial business and they bleed there rules into the public. For the most part DOT simply has a specification for a part. DOT brake fluid, or air brake lines for example. I think BC Broncos has DOT approved brake hoses and it was simply a matter of submitting some paperwork to show they meet the specs.

Proving something is illegal difficult when it isn't. I remember getting a boat without any paperwork many years ago. Had to take it to the fish and game to get paperwork. The officer who investigated it commented it is nice when they are stolen, it shows up really quick and has a paper trail. But when they can't find anything, they have to keep looking, and looking. Go into obscure databases. You can never be sure of anything because there might be a database that was overlooked. Eventually you get tired of looking and call it clean. Which was my case and I got the boat legal. That is just an example of trying to find something when nothing is there. Eventually you give up and accept it.

Keep in mind it isn't just 4WDs running heim joint steering. There are countless aftermarket control arm companies making whole new control arms, with heims for performance cars as well. I would say the better number of aftermarket wheels (especially those that have an emphasis on style) don't have and DOT markings.

So you are chasing the urban legend. Sometimes those legends get a life of there own.
 

blubuckaroo

Grease Monkey
Joined
Jun 11, 2007
Messages
11,796
Loc.
Ridgefield WA
All this would depend on your particular state.
In CA, there is the Mait Team.
They inspect vehicles involved in serious accidents.
They actually disassemble the vehicle and look for fault in he accident.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
That would be post serious (people died) accident. Even then just finding something that is different from how it was originally made doesn't automatically mean that it is at fault. They would have to test parts and show that it was the cause. That would be pretty easy if you used some chinium special 3/8" heims for steering. But for normal parts that are used it would be really difficult to show that it was the joint that was the problem and not the tires that are 50% larger then stock that really did it in, or the welded in drop bracket on the track bar, the drop pitman arm, or the...
 
OP
OP
Yeller

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
We all know that worn parts are a problem even on a factory original untouched survivor that could fail and cause a serious accident. At the same time over taxing those same stock parts, even in new condition, on a lifted big tired truck can aggrivate failure, which could potentially add liability. But that still doesn’t address the question of legal or not.

Now some states have regulations about bumper height, lighting (Virginia, has roof light regs, a few Jeep models were not legal for sale off the show room floor) and “modifying to function differently than factory designed” and those states it’s still fuzzy what you can and can’t do and subject to the inspector. But we’re after documented evidence of legality
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
Everything is legal, unless there is a law against it.
You are not going to find a law that says they are legal.
And so far we have not found one that says they are not.
 

68ford

Bronco Guru
Joined
Dec 26, 2004
Messages
2,710
When I was at Spartan motors(firetruck and diesel motorhome chassis manufacturer) about 4 years ago, legality of changing parts came up.
Long story short, a shop in the US, I do not know what state, was found guilty of involuntary manslaughter because a 3/8 pushlock air line fitting was changed from a 90 degree to a straight fitting to get a truck down the road. Replacing a 90 degree fitting with a straight fitting to one side only on the front brakes was determined to speed up brake application timing of the one side and made the truck swerve in winter conditions ultimately hitting a car killing 2 people.
 

No Hay

Bronco Guru
Joined
Jun 4, 2014
Messages
1,657
All this would depend on your particular state.
In CA, there is the Mait Team.
They inspect vehicles involved in serious accidents.
They actually disassemble the vehicle and look for fault in he accident.

I always think of this when I'm on the motorcycle forums seeing folks removing reflectors.

Another thought is often times in a legal battle, it seems rather than right, wrong, legal or not, the party with the most resources wins. %)
 

pipeline010

Sr. Member
Joined
Nov 15, 2017
Messages
618
NJ is extremely tough about aftermarket and tagging your classic car/truck. In theory....

'Historic' tags require no, absolutely zero, modifications from the day it rolled off the factory floor.

Hood scoop? FAIL
Tachometer? FAIL
Fender Removal? FAIL

https://www.state.nj.us/mvc/pdf/vehicles/historic-samples.pdf

In practice, however, it's a breeze.

You bring two color photos of your car/truck to one of the main DMVs. A lady looks at them, says "wow, cool Bronco" and shows it to the other, younger and attractive, DMV girl who loves it and smiles at you. Then the first lady asks if it's been modified in any way. You say "Nope, even the radio is original. I love me some Fleetwood Mac on 8-track!"

Then they give you your plates and you never have to get it inspected. Your renewal is by mail once every 3 years I think.

At least, that's how it went with me.
 

blubuckaroo

Grease Monkey
Joined
Jun 11, 2007
Messages
11,796
Loc.
Ridgefield WA
Everything is legal, unless there is a law against it.
You are not going to find a law that says they are legal.
And so far we have not found one that says they are not.

It really depends on how much you have to loose.
If the MAIT team is called in, your estate is the focus. Right or wrong, makes no difference. Your lowered pitman, multiple shocks, or heim joints are going to cost you.
 

okorangebrnco

Bronco Guru
Joined
Nov 25, 2004
Messages
1,669
In my dealings, both commercial and non-commercial, I have found that it lies heavily with written interpretation. I know our commercial trucks at work require extensive logging of only commercially approved parts. Insert DOT obligation since the DOT is the umbrella governing body. I also believe it is partial myth on legality for non commercial vehicles because of liability issues. In Oklahoma I have never had an issue with running heim steering, hydro assist steering, bead-locks, or the like. BUT I also assume all liability should something go wrong.

Steve, you bring up a very interesting and very intriguing point to research. While I have never seen anything in writing, it has always been perceived and accepted as law for yes or no. I will reach out to our safety specialist that used to work for the DOT and see if he can steer me in a direction for answers
 

tirewater

Bronco Guru
Joined
Jan 28, 2011
Messages
1,046
Loc.
San Francisco Bay Area
I don't think the question should be whether you're breaking the law by installing non DOT parts. The question is whether your insurance company will cover you and your car if you have any non stock modifications and things go pear shaped. A 5" lift kit could easily void your insurance if the issue of the lift kit every came up. I image the same thing for heim joints not certified for the street. In the end, these are risks we take...we assume the responsibility - even if the insurance company decides to void a claim because of unspecified modifications.
 

garberz

Bronco Influencer
Joined
Jun 24, 2007
Messages
6,864
Loc.
Conejo Valley, Ca.
I don't think the question should be whether you're breaking the law by installing non DOT parts. The question is whether your insurance company will cover you and your car if you have any non stock modifications and things go pear shaped. A 5" lift kit could easily void your insurance if the issue of the lift kit every came up. I image the same thing for heim joints not certified for the street. In the end, these are risks we take...we assume the responsibility - even if the insurance company decides to void a claim because of unspecified modifications.

So how is it then? Companies like 4wheelParts are installing lift kits and tire/wheel packages for Dealerships that sell new trucks. Trucks are sold and the accessories are financed, and it still retains the factory warranty. Is this an issue with insurance companies?

Mark
 

tirewater

Bronco Guru
Joined
Jan 28, 2011
Messages
1,046
Loc.
San Francisco Bay Area
So how is it then? Companies like 4wheelParts are installing lift kits and tire/wheel packages for Dealerships that sell new trucks. Trucks are sold and the accessories are financed, and it still retains the factory warranty. Is this an issue with insurance companies?

Mark

Each insurance company is different, you'd have to bring it up with them. A quick internet search of insurance companies and lift kits provides a variety of anecdotal stories.
 

68ford

Bronco Guru
Joined
Dec 26, 2004
Messages
2,710
NJ is extremely tough about aftermarket and tagging your classic car/truck. In theory....

'Historic' tags require no, absolutely zero, modifications from the day it rolled off the factory floor.

Hood scoop? FAIL
Tachometer? FAIL
Fender Removal? FAIL

https://www.state.nj.us/mvc/pdf/vehicles/historic-samples.pdf

In practice, however, it's a breeze.

You bring two color photos of your car/truck to one of the main DMVs. A lady looks at them, says "wow, cool Bronco" and shows it to the other, younger and attractive, DMV girl who loves it and smiles at you. Then the first lady asks if it's been modified in any way. You say "Nope, even the radio is original. I love me some Fleetwood Mac on 8-track!"

Then they give you your plates and you never have to get it inspected. Your renewal is by mail once every 3 years I think.

At least, that's how it went with me.

"Has it been modified in any way?" Im sure she asked because she is just currious, not because it matters legally hahaha
 
OP
OP
Yeller

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
In my dealings, both commercial and non-commercial, I have found that it lies heavily with written interpretation. I know our commercial trucks at work require extensive logging of only commercially approved parts. Insert DOT obligation since the DOT is the umbrella governing body. I also believe it is partial myth on legality for non commercial vehicles because of liability issues. In Oklahoma I have never had an issue with running heim steering, hydro assist steering, bead-locks, or the like. BUT I also assume all liability should something go wrong.

Steve, you bring up a very interesting and very intriguing point to research. While I have never seen anything in writing, it has always been perceived and accepted as law for yes or no. I will reach out to our safety specialist that used to work for the DOT and see if he can steer me in a direction for answers

Yes if I drive my rig with full hydro steering on the street I should expect some additional liability on my part and I have yet to find anything that says no.

I'd be interested to see if your safety specialist has any comments.

So how is it then? Companies like 4wheelParts are installing lift kits and tire/wheel packages for Dealerships that sell new trucks. Trucks are sold and the accessories are financed, and it still retains the factory warranty. Is this an issue with insurance companies?

Mark

Exactly my point, many of those have hiem joints on them, I've installed a ton of them for a jeep dealer.
 

Boss Hugg

Contributor
Bronco Guru
Joined
Jun 8, 2010
Messages
2,213
"Has it been modified in any way?" Im sure she asked because she is just currious, not because it matters legally hahaha

or (in TX) when my truck is three months past registration expiration and I go to renew it: "Have you driven the vehicle on the road with expired registration?" (If so, there's gonna be a fee equal to a driving-with-expired-reg ticket cost.)

"No. It's been broke down." But I had to drive it to the inspection station because it has to be inspected before I can register it.

Yeller, you're making me want to pull my hair out. All I've seen today is how backward our govt is. (Our borders are open, but the govt is closed.)

We need to stir creativity and ingenuity to spark an increase in manufacturing, yet anything that we didn't pay the govt billions to approve is deemed illegal....

Sorry for the rant.
 

blubuckaroo

Grease Monkey
Joined
Jun 11, 2007
Messages
11,796
Loc.
Ridgefield WA
Yes if I drive my rig with full hydro steering on the street I should expect some additional liability on my part and I have yet to find anything that says no.

I'd be interested to see if your safety specialist has any comments.



Exactly my point, many of those have hiem joints on them, I've installed a ton of them for a jeep dealer.

In the end, it's the owners responsibility to be driving a legal (DOT Approved) vehicle.
 
Top