I PUT ON A NEW VOLTAGE REGULATOR CONNECTOR AND LOST A VOLT ACROSS MY CHARGING SYSTEM (WAS 14.5 NOW IS 13.65)FROM THE VRC IASF I=12v WITH THE KEY ON
A= 2 WIRES 12.5 ALWAYS (1 CONNECTED ONE NOT)
S= 2 WIRES 11.6 KEY ON (1 OF THESE IS CONNECTED TO THE GREEN WITH RED STRIPE WIRE FROM THE TRUCK HARNESS.)1 CONNECTED ONE NOT
F= 12V KEY ON
ALSO FROM THE ALT POST (STA) THE WIRE COMES OUT OF THE TRUCKS HARNESS AT THE VRC BUT ISN'T CONNECTED TO ANYTHING
ANY HELP WOULD BE APPRECIATED
BS
A= 2 WIRES 12.5 ALWAYS (1 CONNECTED ONE NOT)
S= 2 WIRES 11.6 KEY ON (1 OF THESE IS CONNECTED TO THE GREEN WITH RED STRIPE WIRE FROM THE TRUCK HARNESS.)1 CONNECTED ONE NOT
F= 12V KEY ON
ALSO FROM THE ALT POST (STA) THE WIRE COMES OUT OF THE TRUCKS HARNESS AT THE VRC BUT ISN'T CONNECTED TO ANYTHING
ANY HELP WOULD BE APPRECIATED
BS