• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Where to get the dust boot?

Banjer Picker

Bronco Guru
Joined
Sep 25, 2006
Messages
1,361
Can I get the upper draglink-to-pitman arm dust boot at a NAPA or parts house. Tore mine getting the steering box off a while back.
 

Ed74

Full Member
Joined
Apr 6, 2005
Messages
307
Loc.
San Diego, CA
I also tore mine a while back. However, I could not find the exact replacement at the autoparts stores. I found only generic boots that were not the proper shape or size. Ended up using my old one and glued it back together, but it was not torn too bad.
 

stlkikn

Sr. Member
Joined
Sep 14, 2005
Messages
402
Energy Suspension offers replacement polyurethane boots in a variety of sizes, they come in both red and black. Daystar also offers them, they were available in a rainbow of colors from them at one point, but they may have dropped a couple of colors over the last couple of years.
Any of your local speed shops or aftermarket vendors should be able to get them for you
 
Top