ASE-73 said:
Assuming Offroad Lights are running 100 watt bulbs ... (100 watts /10 volts) = 10 Amps (worst case current draw) ... this is well under the WeatherPack continuous rating.
the lights was just an example.
however, you
may, at some point, be powering both lights on the same wire since the relay has only one 87 terminal.
some folks might run both lamp wires to a single 1/4" quick connect for the 87 terminal. some folks might run a single wire out of the 87 terminal and then split power (as KC Kilites shows in a diagram
here). you're also going to have only one wire coming from the vehicle's power to the relay's 30 terminal this will carry amperage for both lights.
all in all, it doesn't change the fact that the weatherpacks can only handle 12AWG @ 19 Amps. it's just adding another ingredient into the soup that i like to call "designing an electrical circuit", so the user needs to keep this all in mind...