HGM
Sr. Member
I suppose I can put that sensor in the intake tube after the maf?
I cant think of a reason you couldnt..
I suppose I can put that sensor in the intake tube after the maf?
One more thing about the harness, there is only one o2 sensor on the passenger side header. Is that ok or do I need to find the wires for the other one and install it too?
If it was running with the one, you're probably ok.. Some of the earlier modles only ran one. I'd probably post up the PCM numbers. Someone may be able to tell exactly what it was from. From there, you'll be able to tell what it needs and doesnt..
I will get the pcm numbers tomorrow.
Where can I get a gasket from to go between the 4r70w and the 205?
Ok here are the PCM numbers, not sure if you need them all but here they are
A9P
1E1O
E9ZF-12A650-CA
61SM12AF03 24356-65
I took the pan off the 4r70w and found this little guy in there.
Any idea what it is?
Ok, just screwing with ya... Sorry, couldnt resist... Thats the shipping plug for the dipstick. At the factory, when they push the dipstick tube into the hole, the little bobber stays in the pan.. Just means you have gone where no man has been before..;D;D