For the coils the diameters are .565 = the 325 spring rate light.
.580 = the 355 spring rate medium and the .590 = 365 spring rate heavy.
yeah the little bumps are just that little bumps, we get by them. It is a learning experience, the joy is in the process the end result is a bonus.
I hear you on with the moisture with the air system. There are ways to deal with it but the bonus is the ease of adjustment with the ride as well as ride height. I like the bags for the amount of tuck I plan to have in the rear fenders. Changing a tire would be a pain. So air up the bags fully and that gives me the room needed to change a tire if needed with a single jack.
I have been looking at coil overs for the front as an other option to avoid multiple coil purchases and cuts. The adjustability is needed I feel with these things.
We have gone back and forth with the rear suspension on mine 4 link, 3 link and so on. getting all things in there and clearing the drive shaft through its travel has been a little more than I expected. there is just not a whole lot of room under the truck with the narrow frame. It would be easyier if I would just cut the bed, but that still is not an option for me. Stock body, the bed floor is not an option. Later on I may drop the seat floor as well as rework the front innerfenders.
Any response from Dale on the inner fenders ?