• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

pics of aftermarket or homemade rockers

abielenberg

Jr. Member
Joined
Feb 23, 2009
Messages
110
Loc.
Parker, CO
I am planning on making some new rockers for my bronco. I have one side thats caved in from hitting it so i decided on making my own. I was just wondering if anyone had any pictures of what they have done. Im planning on using 1/4in steel that i have laying in my garage thats left over from my bumper. or just some ideas would be awsome too.
 

Devin

Bronco Kineticist
Joined
Apr 29, 2004
Messages
3,956
Here are my home-made rock sliders. I have since trimmed the inner fender to match the bottom of the slider.
 

Attachments

  • IMG_0953.JPG
    IMG_0953.JPG
    211.6 KB · Views: 282

joser

Sr. Member
Joined
Aug 9, 2003
Messages
698
Loc.
Chesterfield, MI
Here are my rockers:

2X6" rectangle tube 3/16" thick. They are welded to the body with no frame tie ins.

I have smacked them on soem big rocks and just slid off. Highly recomended modification for the hard core crowd.
 

Attachments

  • Upper Terminator.jpg
    Upper Terminator.jpg
    130.8 KB · Views: 137

1971BroncoSport

Full Member
Joined
Dec 23, 2008
Messages
204
These are from Tom's Bronco Parts.

I countersunk holes so I could run a stainless steel socket head bolt through, which gave it better strength to step up on.
 

Attachments

  • P8240006.jpg
    P8240006.jpg
    91.6 KB · Views: 107
  • P1010060.jpg
    P1010060.jpg
    78.2 KB · Views: 93

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,552
I built a set that screw on. This let me paint everything first without burning the paint with the welder. They worked real good. They are tied into structure on the body as well.
 

Attachments

  • P1010004_2_2_2.JPG
    P1010004_2_2_2.JPG
    62.8 KB · Views: 92
  • P1010006_2_2_2.JPG
    P1010006_2_2_2.JPG
    68.6 KB · Views: 115
  • P1010008_2_2_2.JPG
    P1010008_2_2_2.JPG
    66.9 KB · Views: 99
  • P1010005.JPG
    P1010005.JPG
    77.1 KB · Views: 109
  • P1010006_3_2.JPG
    P1010006_3_2.JPG
    72.7 KB · Views: 96
  • P1010002_3_2.JPG
    P1010002_3_2.JPG
    72.4 KB · Views: 106

AWS

Sr. Member
Joined
Aug 2, 2004
Messages
596
Loc.
ST LOUIS
Here's mine.
Steve
 

Attachments

  • rockers 003.jpg
    rockers 003.jpg
    130.7 KB · Views: 86
  • PICT0083.jpg
    PICT0083.jpg
    115.9 KB · Views: 120
  • PICT0050.jpg
    PICT0050.jpg
    148.8 KB · Views: 102

gravy

Bronco Guru
Joined
Sep 4, 2006
Messages
1,236
Loc.
Parsippany
Heres mine, I made them out of 1 5/8. They also connect to the roll cage tying everything to the frame.
 

Attachments

  • DSC01061.JPG
    DSC01061.JPG
    32.8 KB · Views: 48
  • DSC01069.JPG
    DSC01069.JPG
    27.4 KB · Views: 58
  • DSC01071.JPG
    DSC01071.JPG
    39.7 KB · Views: 55

j.blakeslee

Bronco Guru
Joined
Oct 16, 2008
Messages
1,558
Loc.
NASSUA NY
Heres some i made up for the wife's there just srewed off it the pic till i fitt and cab the ends... and then weld them up..and in
 

Attachments

  • PB280054 [Desktop Resolution].jpg
    PB280054 [Desktop Resolution].jpg
    52.6 KB · Views: 43
  • PB280053 [Desktop Resolution].jpg
    PB280053 [Desktop Resolution].jpg
    83.8 KB · Views: 57
  • PB280055 [Desktop Resolution].jpg
    PB280055 [Desktop Resolution].jpg
    70.8 KB · Views: 51
Top