• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Project grocery getter

Izzy

Bronco Guru
Joined
Sep 5, 2009
Messages
2,430
Loc.
Texas
Looks great. I'm amazed at how much you get done in a short order. Great job.
 

fungus

Bronco Guru
Joined
May 27, 2009
Messages
1,548
Loc.
Kaneohe Bay, Oahu
Um ya I think .250 wall tubing should be fine. I'm going to plate the bottom to protect it from point impacts and I still need to plate them once I finally get done cutting on them.

I can't believe this is the first time I looked at this thread!:eek: You've done some awesome work here! I'm planning the same type of home brew extended radius arms with the 2x2x.250 square tubing. What's the reason you went with two seperate bends in the arm? Tire clearance due to not being able to move the cast C wedges to Bronco width on the housing? I've got a 77 front end that I plan to cut and move the C wedges in and was planning just a single bend (cut and re-weld like yours) to parallel the frame. Splicing two EBs out here into one w/ a planned stretch of 20-24" and added 3rd row w/ seating for 6. Won't come together anywhere nears as fast as this one but it'll get there.

Nice work and thanks for taking us along blow by blow!

Fungus
 
OP
OP
P

ponyracer

Sr. Member
Joined
Sep 30, 2009
Messages
706
Loc.
Crestview, Fl, 32539
Thanks, I did the arms like that for tire clearance and so I could mount them flush with the bottom of the frame. I'm not a big fan of them, they will be replaced soon with a full 3 link as they don't flex like I hoped. The 2X2 does work well and is easily adapted to the stock radius arm fronts.

Getting ready to tear her apart again, not 100% sure which way I'm going yet, either putting the 435/205 behind the windsor or going deisel. I'd like to go to a 6bt but we'll see, may go to an isuzu 4 popper.
 

fungus

Bronco Guru
Joined
May 27, 2009
Messages
1,548
Loc.
Kaneohe Bay, Oahu
Thanks, I did the arms like that for tire clearance and so I could mount them flush with the bottom of the frame. I'm not a big fan of them, they will be replaced soon with a full 3 link as they don't flex like I hoped. The 2X2 does work well and is easily adapted to the stock radius arm fronts.

So was the tire clearance an issue because you've got a 78/79 D-44 front and could not move the C wedges? I'm thinking if I cut & move mine in to EB width on my 77 D-44 I'll be fine w/ a single bend towards the joint to mount flush w/ the frame. What size tires and BS on your wheels you runnin'?
 
OP
OP
P

ponyracer

Sr. Member
Joined
Sep 30, 2009
Messages
706
Loc.
Crestview, Fl, 32539
I'm actually running a 76 axle, just to lazy to move the mounts. Ya I'd say if you move the wedges you wouldn't need to bend them at all or very little. The FW stuff is about
3" wider per side. I'm running 35 12.50's on 15X8 wheels with 4" (as I remember).
 

punisher338

New Member
Joined
Apr 4, 2010
Messages
45
Loc.
Milton, FL
Man that thing is looking good.. It makes me want to get out and work on mine too. Its to dang cold and rainy though, I think I will just take her for a spin this weekend.;D;D
 
OP
OP
P

ponyracer

Sr. Member
Joined
Sep 30, 2009
Messages
706
Loc.
Crestview, Fl, 32539
Time to put this project back to the top. I'm finally going to tons or rockwells. I'm at a point where I need to dump some $ into the 1/2 ton stuff or just spend the $ on tons.

It is lacking as a "good" dd, and I don't feel like trying to get it through the alaska safety inspection so I'm going to go in a more offroad direction with the old girl.

Plans are tons or rocks, 42-44's, already got the hummer beadlocks, just need to order the centers. I've been collecting link stuff, using 1.25 hiems from ruff stuff, front 3 link, coils. Rears will stay on leaves for now.
 
OP
OP
P

ponyracer

Sr. Member
Joined
Sep 30, 2009
Messages
706
Loc.
Crestview, Fl, 32539
Well, sold my 35's on sat. Today the wife and I took a 6 hr road trip up to valdosta ga to collect my new axles. Got a front d60 out of a 93 f350 and a matching rear sterling!! No more 1/2 ton crap for me!! Also got a smoking deal on 4 12 bolt hummer wheels and 6 37" hummer tires to go on them. Will be recentering the hummers to 3.5 bs or so, shaving the front/rear axles, welding the rear, locker in the front, 5.38's, hi steer, 3 link, and hopefully some 44" boggers. The next month or so should be interesting. I leave for out of town buisness in a week, be gone a month, so I'm rushing to see what I can get done before then. Pics tomorrow!!
 
OP
OP
P

ponyracer

Sr. Member
Joined
Sep 30, 2009
Messages
706
Loc.
Crestview, Fl, 32539
Well, sold my 35's on sat. Today the wife and I took a 6 hr road trip up to valdosta ga to collect my new axles. Got a front d60 out of a 93 f350 and a matching rear sterling!! No more 1/2 ton crap for me!! Also got a smoking deal on 4 12 bolt hummer wheels and 6 37" hummer tires to go on them. Will be recentering the hummers to 3.5 bs or so, shaving the front/rear axles, welding the rear, locker in the front, 5.38's, hi steer, 3 link, and hopefully some 44" boggers. The next month or so should be interesting. I leave for out of town buisness in a week, be gone a month, so I'm rushing to see what I can get done before then. Pics tomorrow!!
 

Izzy

Bronco Guru
Joined
Sep 5, 2009
Messages
2,430
Loc.
Texas
Knowing how fast you work, you'll be done by the time most of us wake up.
 
OP
OP
P

ponyracer

Sr. Member
Joined
Sep 30, 2009
Messages
706
Loc.
Crestview, Fl, 32539
Well I'm still in WI until the end of the month, meanwhile the boxes are starting to arrive in fl. I'm getting ready to order some more brackets from ballistic, and I'm working with diybeadlocks.com from pirate4x4 on some custom h1 beadlock centers and rock rings. Hopefully all the brackets and centers will be waiting for me when I get home.

Figured I'd post up some pics of what I did just before I went out the door.

D60/Sterling
DSC05156.jpg

DSC05155.jpg

DSC05157.jpg


I'm shaving the front and rear axles for the best ground clearance, didn't have time to get started on the front but I did a number on the rear!!

The sterling doesn't have near the hangdown of the 14 bolt but theres ALWAYS room for improvement.
DSC05162.jpg

DSC05163.jpg

Oh boy...
DSC05168.jpg

DSC05169.jpg

HUGE rock catching lip is completely gone
DSC05170.jpg

DSC05171.jpg

DSC05174.jpg


And some pretty stuff from ruff stuff, thanks Dan!! No Dan doesn't sell rusty jamb nuts, those I had kicking around lol.
DSC05158.jpg
 
Top