• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Torque steer

ehumaui

Sr. Member
Joined
Apr 17, 2004
Messages
913
Everything is complete, nv4500, efi, Lars bars, not leaking (almost), torque bar, detroit locker rear.

The problem I am having is torque steer. During acceleration she goes left, off gas she goes right.

5.5 lift to high? Soft springs? Locker?


Rc
 

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,123
Loc.
Cuchara, CO
Everything is complete, nv4500, efi, Lars bars, not leaking (almost), torque bar, detroit locker rear.

The problem I am having is torque steer. During acceleration she goes left, off gas she goes right.

5.5 lift to high? Soft springs? Locker?


Rc

Sounds like your track bar and drag link are not parallel. Post a photo.
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Its due to the locker mostly might be exaggerated some by the hieght and soft springs but still even cars will torque steer front wheel drive cars do it easily. Ever watched a drag car take off? its a great example of torque steer.
 

ljspop

Jr. Member
Joined
Nov 2, 2009
Messages
110
Loc.
San Marcos, Ca
Just another data point...

I have the same thing with the same lift and detroit. Unsettling at first, but used to it now. My steering geometery is good, but I could use more caster angle.
 
OP
OP
E

ehumaui

Sr. Member
Joined
Apr 17, 2004
Messages
913
Did not notice to much with the c4, but really now with shifting.

Rc
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
because autos transfer power smoother than manuals they also use a little more power so less gets to the ground.
 

dieselbronco

Full Member
Joined
Jan 18, 2009
Messages
151
Loc.
Tolland CT
I have the same issue. I think mine is a combination of tall soft springs, no sway bar, short wheel base and not quite enough camber. As my rear squats and the front lifts on such a short wheel base it changes a lot of angles in this style suspension. Mine is also open in the rear.


I also have gotten used to the way it drives, it's my friends that notice it now.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
More then likely front suspension/steering linkage/track bar issues.

The locker can have an effect. If one tire is a little shorter then the other it can cause issues. Swap side to side, if the left and right change sides, it is tires/locker issue.

But your description is very strong case of messed up angles of dangles. 5½" of lift and soft springs don't help matters. It is fixable, but it isn't a one size fixes all fix. It is a matter of tuning the track bar and steering to get the linkages to behave together.
 

beaux312

Sr. Member
Joined
Nov 10, 2007
Messages
940
Loc.
Hartford, AL
mine does the same thing, steering gem is good, air pressure is good, have a L/S rear. I think on mine is the lift and springs and a torqey motor. I kinda like it picking up the front end like it does:)
 
OP
OP
E

ehumaui

Sr. Member
Joined
Apr 17, 2004
Messages
913
I guess that there is no quick fix. I am just spoiled driving my Tacoma. I just don't like how squirrelly it gets. How about lowering it to 3.5"?

Rc
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
Sway bar won't fix bad geometery. Fix it right, don't patch around it. Don't kill your ride with duel shocks to rattle your teeth out to hide that the geometery is wrong. Please, fix it right.
 

dieselbronco

Full Member
Joined
Jan 18, 2009
Messages
151
Loc.
Tolland CT
Tourq steer doesn't mean bad geometry. Short wheelbase and soft suspension on big nobby tires will cause strang things to happen. No matter how you look at it as the front suspension travels it moves the front end from side to side, Exaggerated by short wheelbase. two shocks will harshen the ride but it will also lessen the lift and sag under shifting.
 

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,123
Loc.
Cuchara, CO
Tourq steer doesn't mean bad geometry. Short wheelbase and soft suspension on big nobby tires will cause strang things to happen. No matter how you look at it as the front suspension travels it moves the front end from side to side, Exaggerated by short wheelbase. two shocks will harshen the ride but it will also lessen the lift and sag under shifting.

To minimize this the drag ink and track bar need to be parallel and as close to the same length as possible - that way the side to side movement does not turn the wheels as much.
 

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
My trail rig on 39.5s drives pretty nice down the highway as it turns out..but talk about torque steer! If I hit the gas hard I can practically change lanes in one truck length. You just get used to it and automatically "pre-correct' the steering.

I've never seen that be really noticeable on my longer wheel-base rigs or those without the rear locker, but I still remember the first time I drove the 408-powerd trail rig and hit the gas a bit...:eek:
 

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
Huh - interesting. I'm welded front and rear and took the Bronco out on the road for some WOT shifting. Barking 4 37" Boggers is fun, I didn't get any torque steer either - not between gears either. I don't have any rear shocks and my suspension is VERY soft. Tire pressures were not set with a gauge either, probably not even close.

I'm wondering if being locked front and rear and in 4wd had something to do with it - no difference on dirt either, drives nice and straight.
 
OP
OP
E

ehumaui

Sr. Member
Joined
Apr 17, 2004
Messages
913
What degree C bushings should I be running with the 5.5 lift and longer Lars bars?

Will ck on track bar when I get home. Pretty sure it parallel.
Rc
 
Top