• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

What have you done to your Bronco today?

jcpetrson

Sr. Member
Joined
Aug 26, 2012
Messages
435
fabricated a piece to block a couple of holes in the firewall. Made an inventory of the parts I need to order this week.
 

Fireball05

Bronco Guru
Joined
Oct 7, 2012
Messages
1,822
Got my dash installed and almost everything hooked back up.



Tomorrow's project, finish connecting the wiring, install the steering column, hook battery up, cross fingers, hope it all works!
 

ahansen_1985

Bronco Guru
Joined
Nov 2, 2008
Messages
1,245
Loc.
amity, oregon
Gotta see this with lens on Andrew, without me driving to Amity ;) C'mon bro!

Planning to leave the front LEDs exposed.... They turned out very clean, no need to cover/hide them:) now to do the rears, and eventually the headlights, and some extras:)


1966,351w,m5od,205....3.5" lift, 2" body, 37/13/15 boggers
 

mofoco1

Bronco Guru
Joined
Aug 25, 2001
Messages
1,474
Loc.
Clovis, CA
fabbing rear hitch/bumper brackets

Started cutting up some tubing to make the frame inserts for the new hitch and bumper under structure. Want to keep the new show chrome stocker, although it will be raised to cover the 3" bodylift gap. When I was cutting the 2x 4 it actually unsprung as I cut the short sides. I have never seen that. I had to weld a little piece of tubing to cinch it back. It will all get boxed and drilled for the mounting holes. I am going to weld the nuts on the inside like I did my front bumper. I think someone else was doing the same type of frame inserts. They are going back 13" so it will have plenty of metal to grip to.
 

Attachments

  • IMG949.jpg
    IMG949.jpg
    52.1 KB · Views: 69
  • IMG950.jpg
    IMG950.jpg
    44.1 KB · Views: 67

Chief Master Sergeant

Retired U.S. Air Force
Joined
Nov 6, 2002
Messages
5,222
Installed A new passenger side exhaust manifold, changed the fluids in the tranny and transfer case. Found TDC and installed the spark plug wires. Busy day!

Sent from my DROID RAZR using Tapatalk 2
 

lonesouth

Contributor
Bronco Guru
Joined
Dec 18, 2003
Messages
5,048
tried my hand at painting today. I learned that I need a bigger compressor. I even ran two oiless compressors and they couldn't keep up. I did manage to get a coat of primer down, but I think I'm going to find a bigger compressor for the paint.

Using a siphon HVLP, spraying rustoleum oil base thinned with acetone.
 

jcpetrson

Sr. Member
Joined
Aug 26, 2012
Messages
435
Does working 13 hours today at work count?

Also, xcntrk - Nice pick. Looked like a great end to a good ride.
 

nathan.hall1

Sr. Member
Joined
Feb 3, 2006
Messages
556
Loc.
Central Washington
I finally did something, I closed a deal on EBay for a Eldelbrock 2181, so today I removed the 2v intake and Valve covers I am going to repaint them while I have it all apart, I picked up new gaskets, thermostat and paint today and started stripping paint off Valve covers and prepping them for fresh paint.

I am also ordering the Lokar throttle and kick down cables, my old truck finally is being sold this week so I have Bronco Money I'm ordering a new 1" body lift the steering shaft components and Saginaw bracket so I can install all my power steering components and am also getting the new calipers and brackets so I can finish the disk brakes, depending on what's left I'll get an MSD ignition system...

Then it's time to start budgeting lift and tires....
 

Z Bronco

Bronco Guru
Joined
Mar 17, 2007
Messages
1,143
Ordered a couple of parts and bought a hole saw and arbor to cut the hole in the firewall for the EFI harness.
 

broncoitis

Bronco Guru
Joined
Jul 23, 2010
Messages
4,449
Fj Mirror!

Got the passenger side FJ Mirror mounted on the door and happy with it overall. Now I just have to get the driver side to match! :eek: Not really looking forward to that at all.
 

Attachments

  • FJ Mirror Install (Jan 2013) 011.jpg
    FJ Mirror Install (Jan 2013) 011.jpg
    71.7 KB · Views: 92
  • FJ Mirror Install (Jan 2013) 014.jpg
    FJ Mirror Install (Jan 2013) 014.jpg
    78.1 KB · Views: 128
  • FJ Mirror Install (Jan 2013) 010.jpg
    FJ Mirror Install (Jan 2013) 010.jpg
    54.5 KB · Views: 102

lonesouth

Contributor
Bronco Guru
Joined
Dec 18, 2003
Messages
5,048
good heavens do I have a pounding headache. I wore a respirator when I was painting yesterday too. Good news, the primer looks really good. Wednesday should be warm enough to paint, so a light sanding, a coat of paint, and I'm good to go!
 

miikee73

Shadetree Guru
Joined
Dec 14, 2010
Messages
3,551
Loc.
Aloha
good heavens do I have a pounding headache. I wore a respirator when I was painting yesterday too. Good news, the primer looks really good. Wednesday should be warm enough to paint, so a light sanding, a coat of paint, and I'm good to go!

Respirator or just a dust mask? The filters on the respirators have a very short shelf life once you take them out of the package.
 

lonesouth

Contributor
Bronco Guru
Joined
Dec 18, 2003
Messages
5,048
respirator with old filters. I figured the filter life was time used, not time open. Guess I'll pick up some more filters.
 

stlo

Bronco Guru
Joined
Mar 1, 2011
Messages
1,228
Loc.
tulsa
Dam thought it would all of them on the same one
 

Attachments

  • image.jpg
    image.jpg
    106.4 KB · Views: 108

Tedster100

Chairman of the Bored
Joined
Aug 25, 2010
Messages
1,762
good heavens do I have a pounding headache. I wore a respirator when I was painting yesterday too. Good news, the primer looks really good. Wednesday should be warm enough to paint, so a light sanding, a coat of paint, and I'm good to go!

Same thing happened to me a few days back. Sprayed Raptor with respirator and still got a headache that made my knees buckle.

Today I made a tool for setting larger rivet nuts, put all the pieces parts back on my rear gate, installed a new sunroof in the hardtop. Only a couple days away from getting the new Rapor lined hard top mounted.
 

broncoitis

Bronco Guru
Joined
Jul 23, 2010
Messages
4,449
Absolutely Nothing done today! Was gonna go and get some paint but ran out of time and don't need it yet anyway! Jumpin the gun on that one. ;D
 
Top